mpc89x53a Megawin Technology, mpc89x53a Datasheet - Page 12

• Manufacturer Part Number: mpc89x53a
• Description: 8-bit Micro-controller
• Manufacturer: Megawin Technology

FZWDTCR: Used to freeze the WDT-controlling register.
OSCDN: Used to adjust the behavior of crystal oscillator.
HWBS: Used to configure the MPC89x53A boot from ISP program or normal application program after
EN6T: Used to configure the MPC89x53A run in 6T 12T mode or 6T mode.
The default value of the OR1 is FFh.
RAM
NVM register: OR1 (Option Register 1):
There are 512 bytes RAM built in MPC89x53A.
The user can visit the leading 128-byte RAM via direct addressing instructions, we have
named those RAM as direct RAM that occupies address space 00h to 7Fh.
Followed 128-byte RAM can be visited via indirect addressing instructions, we have named
those RAM as indirect RAM that occupied address space 80h to FFh.
The other 256-byte RAM is named expanded RAM that still occupied address space 00h to
FFh. An user can access it via general register Ri, or via data pointers DPTR associated with
MOVX instructions, say
characteristic of instruction MOVX which is designed to access external memory, the user can
set the bit ERAM in SFR AUXR as 1, and by doing so is to hide the expanded RAM and to visit
the external memory.
FZWDTCR
12
Bit-7
0:= The MPC89x53A will run in 6T mode
1:= The MPC89x53A will run in 12T mode
0:= The MPC89x53A will boot from ISP start address after power-on.
1:= No operation. The MPC89x53A will boot from normal application program.
1:= The gained of crystal oscillator is enough for oscillator to start oscillating up to 48 MHz.
the power-on sequence.
0:= The DC gained of crystal oscillator amplifier is doubled but bandwidth is reduced. It will bring
1:= (default) Permit all the reset events from power-up, software and the Watch Dog Timer
0:= Configure the SFR WDTCR to be reset only via power-up action, not by software reset
help to EMI reducing and improve the power consumption. Dealing with application does
not need high frequency clock (under 20MHz), and It is recommended to do so.
Bit-6
could reset the SFR WDTCR.
nor reset from the Watch Dog Timer.
Bit-5
MOVX
OSCDN
MPC89x53A Data Sheet
Bit-4
A, @R1
or
Bit-3
MOVX
Bit-2
A, @DPTR
HWBS
. To reserve the natural
Bit-1
EN6T
Bit-0
MEGAWIN