le80cz-tr STMicroelectronics, le80cz-tr Datasheet

no-image

le80cz-tr

Manufacturer Part Number
le80cz-tr
Description
Very Low Drop Voltage Regulators With Inhibit
Manufacturer
STMicroelectronics
Datasheet
Features
Description
The LExxAB and LExxC are very low drop voltage
regulators available in SO-8 and TO-92 packages
and in a wide range of output voltages.
The very low drop voltage (0.2 V) and the very low
quiescent current make them particularly suitable
for low noise low power applications and specially
in battery powered systems.
They are pin to pin compatible with the older
L78Lxx series. Furthermore in the 8 pin
configuration (SO-8) they employ a shutdown
logic control (pin 5, TTL compatible). This means
that when the device is used as a local regulator,
Table 1.
February 2008
Very low dropout voltage (0.2 V typ)
Very low quiescent current (typ. 50 µA in OFF
MODE, 0.5 mA in ON MODE, no load)
Output current up to 100 mA
Output voltages of 1.25; 2.5; 2.7; 3; 3.3; 3.5; 4;
4.5; 4.7; 5; 5.5; 8 V
Internal current and thermal limit
Only 2.2 µF for stability
Available in ± 1 % (A) or ± 2 % (C) selection at
25 °C
Supply voltage rejection: 80 dB (typ.)
Temperature range: -40 to 125 °C
Device summary
LE25AB
LE27AB
LE33AB
LE12C
LE30C
LE33C
Very low drop voltage regulators with inhibit
Part numbers
LE35AB
LE45AB
LE47AB
Rev 11
LE35C
LE40C
LE45C
it’s possible to put in stand by a part of the board
even more decreasing the total power
consumption. In the three terminal configuration
(TO-92) the device is even in ON STATE,
maintaining the same electrical performances. It
needs only 2.2 µF capacitor for stability allowing
room and cost saving effect.
TO-92
LE50AB
LE80AB
LE50C
LE55C
LE80C
LExxAB
SO-8
LExxC
www.st.com
1/40
40

Related parts for le80cz-tr

Related keywords