w681511 Winbond Electronics Corp America, w681511 Datasheet - Page 10

• Manufacturer Part Number: w681511
• Description: Single-channel Voiceband Codec
• Manufacturer: Winbond Electronics Corp America

The power supply for the analog and digital parts of the W681511 must be 5V +/- 10%. This supply
voltage is connected to the V
ceramic capacitor.
The analog ground reference voltage is available for external reference at the V
needs to be decoupled to V
The PCM interface is controlled by pins BCLKR, FSR, BCLKT & FST. The input data is received
through the PCMR pin and the output data is transmitted through the PCMT pin. The modes of
operation of the interface are shown in Table 7.3.
The Long Frame Sync or Short Frame Sync interface mode can be selected by connecting the
BCLKR or BCLKT pin to a 64 kHz to 4.096 MHz clock and connecting the FSR or FST pin to the 8
kHz frame sync. The device synchronizes the data word for the PCM interface and the CODEC
sample rate on the positive edge of the Frame Sync signal. It recognizes a Long Frame Sync when
the FST pin is held high for two consecutive falling edges of the bit-clock at the BCLKT pin. The length
of the Frame Sync pulse can vary from frame to frame, as long as the positive frame sync edge
occurs every 125 μsec. During data transmission in the Long Frame Sync mode, the transmit data pin
7.4. PCM I
7.3. P
7.3.1. Analog and Digital Supply
7.3.2. Analog Ground Reference Voltage Outpt
7.4.1. Long Frame Sync
OWER
NTERFACE
BCLKR
64 kHz to 4.096 MHz
V
V
V
V
SS
SS
DD
DD
M
ANAGEMENT
SS
DD
through a 0.01 μF ceramic capacitor.
Table 7.3 PCM Interface mode selections
pin. The V
FSR
8 kHz
V
V
V
V
SS
DD
SS
DD
DD
pin needs to be decoupled to ground through a 0.1 μF
- 10 -
Interface Mode
Long or Short Frame Sync
ISDN GCI with active channel B1
ISDN GCI with active channel B2
ISDN IDL with active channel B1
ISDN IDL with active channel B2
AG
pin. This voltage
W681511