at89lp2052-20xi ATMEL Corporation, at89lp2052-20xi Datasheet - Page 61

• Manufacturer Part Number: at89lp2052-20xi
• Description: At89lp2052 8-bit Microcontroller With 2/4-kbyte Flash
• Manufacturer: ATMEL Corporation

23.4.3
23.4.4
3547H–MICRO–5/07
Program Enable
Chip Erase
Function:
Usage:
Figure 23-7. Program Enable Sequence
Function:
Usage:
Figure 23-8. Chip Erase Sequence
Note:
• Enables the programming interface to receive commands.
• Program Enable must be the first command issued in any programming session. In parallel
1. Bring CS (P3.2) low.
2. Drive P1 to AAh and pulse XTAL1 high.
3. Drive P1 to ACh and pulse XTAL1 high.
4. Drive P1 to 53h and pulse XTAL1 high.
5. Bring CS high.
• Erases (programs FFh to) the entire 2/4-Kbyte memory array.
• Erases User Signature Row if User Row Programming Fuse bit is enabled.
• Lockbit1 and Lockbit2 are programmed to “unlock” state.
1. Bring CS (P3.2) low.
2. Drive P1 to AAh and pulse XTAL1 high.
3. Drive P1 to 8Ah and pulse XTAL1 high.
4. Bring CS high.
5. Wait 4 ms, monitor P3.1, or poll data/status.
programming a session is active while RST remains at V
is active while RST remains at V
RDY/BSY
XTAL1
XTAL1
The waveforms on this page are not to scale.
CS
P1
CS
P1
AAh
AAh
CC
ACh
.
8Ah
53h
AT89LP2052/LP4052
PP
. In serial programming a session
61