W83637HF Winbond Electronics Corp America, W83637HF Datasheet - Page 107

• Manufacturer Part Number: W83637HF
• Description: Description = LPC I/o Plus H/w Monitor, Smart Fan Control, Smart Card (PC/SC) Reader, Memory Stick Reader I/F, Sd/mmc Card Reader I/f ;; Package = QFP 128
• Manufacturer: Winbond Electronics Corp America

CR23 (Default 0x00)
CR24 (Default 0b1s000s0s)
CR25 (Default 0x00)
Bit 7 - 1
Bit 0
Bit 7
Bit 6
Bit 5 - 3 : Reserved
Bit 2
Bit 1
Bit 0
When trying to make a change to this bit, new value of PNPCVS must be complementary to the old
one to make an effective change. For example, the user must set PNPCVS to 0 first and then
reset it to 1 to reset these PnP registers if the present value of PNPCVS is 1. The corresponding
power-on setting pin is NDTRA (pin 52).
Bit 7 - 6 : Reserved
Bit 5
Bit 4
Bit 3
Bit 2 - 1 : Reserved
Bit 0
: IPD (Immediate Power Down).
down mode immediately.
: EN16SA
= 0
= 1
:CLKSEL
= 0 The clock input on Pin 1 should be 24 Mhz.
= 1 The clock input on Pin 1 should be 48 Mhz.
The corresponding power-on setting pin is SOUTB (pin 83).
: ENKBC
= 0
= 1
This bit is read only, and set/reset by power-on setting pin. The corresponding power-
on setting pin is SOUTA (pin 54).
: Reserved
: PNPCSV
= 0
= 1
: URBTRI
: URATRI
: PRTTRI
: FDCTRI.
12 bit Address Qualification
16 bit Address Qualification
KBC is disabled after hardware reset.
KBC is enabled after hardware reset.
The Compatible PnP address select registers have default values.
The Compatible PnP address select registers have no default value.
: Reserved.
When set to 1, it will put the whole chip into power
- 102 -
Publication Release Date: June 25, 2003
W83637HF
Revision 1.3