at86rf211 ATMEL Corporation, at86rf211 Datasheet - Page 12

• Manufacturer Part Number: at86rf211
• Description: Fsk Transceiver For Ism Radio Applications
• Manufacturer: ATMEL Corporation

IF1 filtering
IF1 Gain and Second Mixer
12
AT86RF211
Figure 11. Schematic Input of the LNA
Figure 12. Schematic Output of the Mixer
The first mixer translates the input RF signal down to 10.7 MHz or 21.4 MHz as chosen
by the user. The local oscillator is provided by the same synthesizer which will generate
a local frequency 10.7 MHz or 21.4 MHz away from the Tx carrier frequency.
The output impedance of the mixer is 330 with a 20% accuracy, so that low cost, stan-
dard 10.7 MHz ceramic filters can be directly driven. Other IFs may be chosen thanks to
the high bandwidth (50 MHz) of the mixer.
A popular ceramic filter is used to reject the second image frequency and provide a first
level of filtering.
The IF1 filter can however be removed; it leads to a sensitivity reduction of about 3 dB
(the substitution coupling capacitor should be > 100 pF).
The input impedance of the IF1 amplifier is naturally 330
voltage gain, i.e. gain at 10.7 MHz or 21.4 MHz added to the conversion gain at 455 kHz
is typically 14 dB when loaded by 1700 . The second mixer operates at a fixed LO fre-
quency of 10.245 MHz or 20.945 MHz. Its output impedance is 1700 in parallel with 20
pF.
RXIN
IF1OUT
to match the input filter. The
1942C–WIRE–06/02