at86rf211 ATMEL Corporation, at86rf211 Datasheet - Page 36
at86rf211
Manufacturer Part Number
at86rf211
Description
Fsk Transceiver For Ism Radio Applications
Manufacturer
ATMEL Corporation
Datasheet
1.AT86RF211.pdf
(48 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
at86rf211S
Manufacturer:
ATMEL/爱特梅尔
Quantity:
20 000
Company:
Part Number:
at86rf211SW
Manufacturer:
LSI
Quantity:
1 815
Table 15. WUC Detailed Description (Continued)
36
MSGTST
WPER
Name
DATL
ISTU
ADD
WL1
WL2
-
AT86RF211
Number
of bits
5
1
1
9
7
3
1
2
Comments
Data length
Valid in fixed data length mode (STOP = 0).
(00000)
-------------------
(11110)
(11111)
Address content
0: message without address field
1: message with address field
Message error test
0: no error detection mode
1: error detection enabling for debugging
Wake-up period
Variable from 10 ms to 328 sec with an accuracy of ±20%.(on-chip RC oscillator)
Minimum delay before TEST1 (check of RSSI level)
Variable from 1ms to 1.024 sec
Delay calculation starts when the reference oscillator starts
Minimum delay between TEST 1 and TEST 2 (check of header detection)
Variable as multiple of WL1 from 0 to 31 x WL1
Inhibit stuff mechanism
0: stuff is used for wake-up message
1: no stuff used in the wake-up message
Reserved, must be kept to reset value
•
WPER can be set from 10 ms to 328 sec with an accuracy of ±20%. A 10 ms period
clock is used for this period generation.
Bit 8 and 7 give a period multiplication factor of 1, 16 or 256 (with two serial by 16 clock
prescalers).
Bit 6 to 0 give the number of cycles of the divided clock from 1 to 128 (counter).
2
2
2
: 1 bit (min data length value)
: 31 bits
: 32 bits (max data length value)
WPER Programming
reset value: (11111)
reset value: 2 x WL1
reset value: 960 ms
reset value: (04)
reset value: (5f)
reset value: 5 ms
reset value: (2)
1942C–WIRE–06/02
reset value: 1
reset value: 0
reset value: 0
reset value: 0
16
16
10
2