jsh-01lwab1 ETC-unknow, jsh-01lwab1 Datasheet - Page 11

• Manufacturer Part Number: jsh-01lwab1
• Description: Gigabit Ethernet 1310 Limiting Transceiver, Reach
• Manufacturer: ETC-unknow

3.6
Data Rate Standard
10.3 GBd
11
Link Length
Fiber Type
SMF, OS1,or OS2
6. The data pattern for the total jitter measurement is one of IEEE 802.3 Clause
7. 99% jitter is as defined in SFF-8431 Revision 3.2. 99% jitter has the same defini-
Specification Notes
1. UI (unit interval): one UI is equal to one bit period. For example, 10.3125 Gbps
2. For LOSA and LOSD definitions, see Loss of Signal Assert/Deassert Level in Op-
3. Transmitter dispersion penalty is measured using the methods specified in the
4. Measured with stressed eye pattern as per IEEE standard 802.3-2005, Clause 52.
5. Distances, shown in the “Link Length” table, are calculated for worst-case fiber
and transceiver characteristics based on the optical and electrical specifications
shown in this document using techniques specified in IEEE 802.3. These dis-
tances are consistent with those specified for 10GBASE-LR and 10GBASE-LW.
52.9 Pattern 1, Pattern 3, or valid 64B/66B data traffic.
tion as “all but 1% for jitter” as used in IEEE 802.3 Clause 52.9.9 and is defined
as the time from the 0.5th to the 99.5th percentile of the jitter histogram.
corresponds to a UI of 96.97 ps.
tical Characteristics.
IEEE standard 802.3-2005 Clause 52.
10 GIGABIT ETHERNET SFP+ 1310 NM
LIMITING TRANSCEIvER, 10 KM REACH
Distance Range (m)
2 – 10,000
Notes
5