s82y-h10f ETC-unknow, s82y-h10f Datasheet - Page 7

• Manufacturer Part Number: s82y-h10f
• Description: Switching Power Supply
• Manufacturer: ETC-unknow

J OVERLOAD PROTECTION
The Power Supply is provided with an overload protection
function that protects the load and the power supply from
possible damage by overcurrent. When the output current rises
above a set value (105% of the rated output current for S82H),
the protection function is triggered, decreasing the output
voltage. When the output current falls within the rated range, the
overload protection function is automatically cleared.
15-/30-/50-/100- and 150-W Models
Note:
J OVERVOLTAGE PROTECTION
All
The Power Supply is provided with an overvoltage protection
function that protects the load and the Power Supply from
possible damage by overvoltage. When the output voltage rises
above a set value (120% of the rated output voltage), the
protection function is triggered, shutting off the output voltage. If
this occurs, reset the S82H by turning it off for more than 1
minute and then turning it on again.
Approx. +20%
Rated output
voltage
–
Except 15, 30, and 50 W Models
If the product is continuously used under short-circuit or overcurrent conditions, deterioration or damage to internal elements may
occur.
+10%
–10%
Output current (%)
Variable
Rated
voltage
Overvoltage
Switching Power Supply
S82H
7