vi-882669 Vicor Corporation, vi-882669 Datasheet - Page 5
![no-image](/images/manufacturer_photos/0/6/695/vicor_corporation_sml.jpg)
vi-882669
Manufacturer Part Number
vi-882669
Description
24vin 48vout 200watts Dc-dc Converter Module
Manufacturer
Vicor Corporation
Datasheet
1.VI-882669.pdf
(9 pages)
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
CONTROL FUNCTIONS - SC PIN
Output Voltage Programming
The output voltage of the converter can be adjusted or
programmed via fixed resistors, potentiometers or voltage
DACs. See Figures 7 and 8.
Trim Down
1. This converter is not a constant power device – it has a
2. The trim down resistor must be connected to the –Sense pin.
Figure 7—Output voltage trim down circuit.
constant current limit. Hence, available output power is
reduced by the same percentage that output voltage is
trimmed down. Do not exceed maximum rated output current.
Error
Amp
1k
1.23V
0.033
F
R
D
(ohms) =
+Out
–Out
+S
SC
–S
Set your site on VICOR at www.vicorpower.com
1,000 Vout
Vnom - Vout
Trim Down
R
D
Load
24Vin/48Vout/200W DC-DC Converter
Figure 8—Output voltage trim up circuit.
Trim Up
1. The converter is rated for a maximum delivered power. To ensure
2. The trim up resistor must be connected to the +Sense pin.
3. Do not trim the converter above maximum trim range
Trim resistor values calculated automatically:
On-line calculators for trim resistor values are available
on the vicor website at: vicorpower.com/tools.html.
Resistor values can be calculated for fixed trim up, fixed
trim down and for variable trim up or down cases for both
1st and 2nd Generation DC-DC converters.
In addition to trimming information, the web site and the
Applications Manual also include design tips, applications
circuits, EMC suggestions, thermal design guidelines and
PDF data sheets for all available Vicor products.
that maximum rated power is not exceeded, reduce maximum
output current by the same percentage increase in output voltage.
(typically +10%) or the output over voltage
protection circuitry may be periodically activated.
Error
Amp
1k
1.23V
R
U
0.033
F
(ohms) =
1,000 (Vout-1.23) Vnom
1.23 (Vout-Vnom)
+Out
–Out
+S
SC
–S
Rev. 5.2
Trim Up
R
U
– 1,000
Page 5 of 9
Load