24llc16 Ceramate Technical Co., Ltd., 24llc16 Datasheet - Page 10

• Manufacturer Part Number: 24llc16
• Description: 16k-bit-serial Eeprom
• Manufacturer: Ceramate Technical Co., Ltd.

POLLING FOR AN ACK SIGNAL
When the master issues a stop condition to initiate a write cycle, the 24LLC16 starts an internal write cycle.
The master can then immediately begin polling for an ACK from the slave device to determine whether the write
cycle is completed.
To poll for an ACK signal in a write operation, the master issues a start condition followed by the slave address.
As long as the 24LLC16 remains busy with the write operation, no ACK is returned. When the 24LLC16
completes the write operation, it returns an ACK and the master can then proceed with the next read or write
operation (see Figure 5-11).
* All specs and applications shown above subject to change without prior notice.
1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN
Tel:[phone]
Fax:[phone]
Figure 5-11. Master Polling for an ACK Signal from a Slave Device
Send Stop Condition to
Send Slave Address
Initiate Write Cycle
with R/
Page 10 of 22
ACK = "0" ?
Send Write
Send Start
Command
Start Next
Operation
Condition
W
bit = "0"
16K-Bit-Serial EEPROM
Yes
No
Email: [e-mail]
Http: www.ceramate.com.tw
2 4 L LC16
Rev 1.0 Aug.5, 2002