MK61FN1M0VMJ12 FREESCALE [Freescale Semiconductor, Inc], MK61FN1M0VMJ12 Datasheet - Page 20

• Manufacturer Part Number: MK61FN1M0VMJ12
• Description: K61 Sub-Family
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

General
3. 120 MHz core and system clock, 60 MHz bus, 50 MHz FlexBus clock, and 20 MHz flash clock. MCG configured for PEE
4. 25 MHz core and system clock, 25 MHz bus clock, and 12.5 MHz FlexBus and flash clock. MCG configured for FEI mode.
5. 4 MHz core, system, 2 MHz FlexBus, and 2 MHz bus clock and 0.5 MHz flash clock. MCG configured for BLPE mode. All
6. 4 MHz core, system, 2 MHz FlexBus, and 2 MHz bus clock and 0.5 MHz flash clock. MCG configured for BLPE mode. All
7. 4 MHz core, system, 2 MHz FlexBus, and 2 MHz bus clock and 0.5 MHz flash clock. MCG configured for BLPE mode. All
8. Data reflects devices with 128 KB of RAM. For devices with 64 KB of RAM, power consumption is reduced by 2 μA.
9. Includes 32kHz oscillator current and RTC operation.
5.2.5.1 Diagram: Typical IDD_RUN operating behavior
The following data was measured under these conditions:
20
• MCG in FBE mode for 50 MHz and lower frequencies. MCG in FEE mode at greater
• USB regulator disabled
• No GPIOs toggled
• Code execution from flash with cache enabled
• For the ALLOFF curve, all peripheral clocks are disabled except FTFL
mode. All peripheral clocks enabled, but peripherals are not in active operation.
peripheral clocks disabled.
peripheral clocks disabled.
peripheral clocks disabled.
than 50 MHz frequencies. MCG in PEE mode is greater than 100 MHz frequencies.
K61 Sub-Family Data Sheet, Rev. 4, 10/2012.
Freescale Semiconductor, Inc.