ADL5532-EVALZ AD [Analog Devices], ADL5532-EVALZ Datasheet - Page 7

• Manufacturer Part Number: ADL5532-EVALZ
• Description: 20 MHz to 500 MHz IF Gain Blocks
• Manufacturer: AD [Analog Devices]

Preliminary Technical Data
EVALUATION BOARD
Figure 6 shows the schematic for the ADL5532 evaluation
board. The board is powered by a single 5V supply.
Table 4. Evaluation Board Configuration Options
Component
C1, C2
C3,
C4
C5, C6
C7, C8
L1
L2, L3, L4, L5
VCC & GND
W1
R1, R2
Figure 7. Evaluation Board Layout (Top)
Function
AC-coupling capacitors.
Provides decoupling for the on board linearizer.
Stabilizes the internal feedback loop for operation below 50 MHz.
Power Supply decoupling capacitors capacitor.
DC bias inductor.
Clip-on terminals for power supply.
2-pin jumper for connection of ground and supply via cable.
Figure 6. Evaluation Board Schematic
Rev. PrD 5/07 | Page 7 of 8
The components used on the board are listed in. Table 4 Power
can be applied to the board through clip-on leads (Vcc, Gnd), or
through Jumper W1.
Figure 8. Evaluation Board Layout (Bottom)
Default Value
10 nF 0402
C3 100 nF 0603
C4 100 nF 0603
C5 10 nF 0603
C6 1 μF 0603
Open 0603
82 nH L0603
Open 0603
VCC Red
GND Black
Open 0603
ADL5532