MCF51QM128VHS FREESCALE [Freescale Semiconductor, Inc], MCF51QM128VHS Datasheet - Page 15

• Manufacturer Part Number: MCF51QM128VHS
• Description: MCF51QM128
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

5. 2 MHz core and system clocks, and 1 MHz bus clock. MCG configured for BLPE mode. All peripheral clocks disabled.
6. 2 MHz core and system clocks, and 1 MHz bus clock. MCG configured for BLPE mode. All peripheral clocks enabled, but
7. 2 MHz core and system clocks, and 1 MHz bus clock. MCG configured for BLPE mode. All peripheral clocks disabled.
8. OSC clocks disabled.
9. All pads disabled.
10. Data reflects devices with 32 KB of RAM. For devices with 16 KB of RAM, power consumption is reduced by 500 nA. For
11. RTC function current includes LPTMR with OSC enabled with 32.768 kHz crystal at 3.0 V
5.2.5.1 Diagram: Typical IDD_RUN operating behavior
The following data was measured under these conditions:
Freescale Semiconductor, Inc.
• MCG in FBE mode, except for 50 MHz core (FEI mode)
• For the ALLOFF curve, all peripheral clocks are disabled except FTFL
• For the ALLON curve, all peripheral clocks are enabled, but peripherals are not in
• Voltage Regulator disabled
• No GPIOs toggled
• Code execution from flash memory with cache enabled
Code executing from flash memory.
peripherals are not in active operation. Code executing from flash memory.
devices with 8 KB of RAM, power consumption is reduced by 750 nA.
active operation
MCF51QM128 Data Sheet, Rev. 6, 01/2012.
Nonswitching electrical specifications
15