PQ070XZ01 SHARP [Sharp Electrionic Components], PQ070XZ01 Datasheet - Page 14

• Manufacturer Part Number: PQ070XZ01
• Description: DEVICE SPECIFICATION FOR VOLTAGE REGULATOR
• Manufacturer: SHARP [Sharp Electrionic Components]

SHARP CORPORATION
6.3 Packing
6.3.3
6.3.2
6.3.1
(2) Bending
(3) Carrier
(1) Rolling
(2) Quantity
(3) Direction
( 1) Adhesiveness
(2) Reel structure
(1) Tape structure
_
Tape characteristics
Rolling
Packing
Wind the tape back on the reel so that the cover tape will be outside
Attach
One reel shall contain
The peel-back
0. IN to O.8N for the angle from 160’
Sealed tape : Bended tape radius
adhesive
The tape shall have a structure
The reel shall be made of polystyrene.
Product
the hole side on the tape.
pressed on the carrier
static electricity.
10 pitch of empty cavities
specifications
method
more than 20 pitch of empty cavities to the trailer and attach
method
tape : Bended
conditions
direction
strength
tape.
of product
of cover tape
If bended tape radius
there is case that cover tape come otf carrier tape.
force between carrier
and quantity
and Dimensions
and Dimensions
(PQ070XZO
Dimensions
in carrier
insertion
3000 PCS.
tape of polystyrene
tape radius
to the leader of the tape and fix the both ends with
tape shall direct to the radiate
UPI
(Refer to Fig. C)
are shown Fig. A.
(Refer to Fig-B)
in which a cover tape is sealed heat-
(Refer to Fig. A)
shall be more than 30mm.
shall be more than 15mm.
tape and cover tape shall be
is less than 30mm.
to 180. . (Tape speed : 5mm/s)
Dimensions
emboss protect against
are shown Fig. B.
(.
fin of product
i \
the tape.
more than
at