PQ070XZ01 SHARP [Sharp Electrionic Components], PQ070XZ01 Datasheet - Page 20

• Manufacturer Part Number: PQ070XZ01
• Description: DEVICE SPECIFICATION FOR VOLTAGE REGULATOR
• Manufacturer: SHARP [Sharp Electrionic Components]

7.4 Soldering
240°C
180°C
25%
(I) Reflow soIdering
(a) Human
(b) Anything
(c) Use a solder dip basin with a minimum
Good caution
consists
against excessive voltages such as caused by static electricity.
(b) The temperature
and the time within
room temperature.
(a) An infrared
Also the solder dip basin must be grounded.
It is recommended
(The temperature
It is recommended
(isolation
or cloth.
inserter.
localized
resin portion
of a bipolar
body must be grounded
or measuring
that is in contact
resistance
must be exercised
temperature
lamp used to heat up for soldering
IC. Following-are
should be with in the temperature
shown in the figure is fin portion
that within
that the second reflow become at the device which is the
the temperature
sloping when soldering-reflow
10MQ or more) from the commercial
instrument
rise in the resin.
with the device such as workbench,
against
two times soldering
to discharge
must be grounded.
some examples
profile as shown in the figure.
static electricity
leak current
The temperature
the static electricity
may cause a
be done at the temperature
of preventive
temperature
is 4C /s or less.
profile below.
since this device
power supply.
of
of the device.)
measures
from the body