71M6543GH MAXIM [Maxim Integrated Products], 71M6543GH Datasheet - Page 108
71M6543GH
Manufacturer Part Number
71M6543GH
Description
Selectable Gain of 1 or 8 for One Current Energy Meter ICs Metrology Compensation
Manufacturer
MAXIM [Maxim Integrated Products]
Datasheet
1.71M6543GH.pdf
(157 pages)
- Current page: 108 of 157
- Download datasheet (3Mb)
71M6543F/H and 71M6543G/GH Data Sheet
108
Name
FL_BANK[1:0]
FLSH_ERASE[7:0]
FLSH_MEEN
FLSH_PEND
FLSH_PGADR[5:0]
FLSH_PSTWR
SFR B6[1:0] 01 01 R/W
SFR B7[7:2] 0
SFR 94[7:0] 0
SFR B2[1]
SFR B2[3]
SFR B2[2]
Location Rst Wk Dir
0
0
0
0
0
0
0
0
© 2008–2011 Teridian Semiconductor Corporation
R/W
W
W
W
R
Description
Flash Bank Selection (71M6543G and 71M6543GH only)
The program memory of the 71M6543G/GH consists of a fixed lower bank of 32 KB,
addressable at 0x0000 to 0x7FFF plus an upper banked area of 32 KB, addressable at
0x8000 to 0xFFFF. The I/O RAM register FL_BANK is used to switch one of four
memory banks of 32 KB each into the address range from 0x8000 to 0xFFFF. Note that
when FL_BANK = 0, the upper bank is the same as the lower bank.
Flash Erase Initiate
FLSH_ERASE is used to initiate either the Flash Mass Erase cycle or the Flash Page
Erase cycle. Specific patterns are expected for FLSH_ERASE in order to initiate the
appropriate Erase cycle. (default = 0x00).
0x55 – Initiate Flash Page Erase cycle. Must be proceeded by a write to
0xAA – Initiate Flash Mass Erase cycle. Must be proceeded by a write to
Any other pattern written to FLSH_ERASE has no effect.
Mass Erase Enable
0 = Mass Erase disabled (default).
1 = Mass Erase enabled.
Must be re-written for each new Mass Erase cycle.
Indicates that a posted flash write is pending. If another flash write is attempted, it is
ignored.
Flash Page Erase Address
Flash Page Address (page 0 thru 63) that is erased during the Page Erase cycle.
(default = 0x00).
Must be re-written for each new Page Erase cycle.
Enables posted flash writes. When 1, and if CE_E = 1, flash write requests are stored in
a one element deep FIFO and are executed when CE_BUSY falls. FLSH_PEND can be
read to determine the status of the FIFO. If FLSH_PSTWR = 0 or if CE_E = 0, flash writes
are immediate.
FL_BANK[1:0]
00
01
10
11
FLSH_PGADR[5:0] (SFR 0xB7).
FLSH_MEEN (SFR 0xB2) and the debug (CC) port must be enabled.
Address Range for Lower Bank
(0x0000-0x7FFF)
0x0000-0x7FFF
0x0000-0x7FFF
0x0000-0x7FFF
0x0000-0x7FFF
Address Range for Upper Bank
0x18000-0x1FFFF
0x10000-0x17FFF
(0x8000-0xFFFF)
0x0000-0x7FFF
0x8000-0xFFFF
v1.2
Related parts for 71M6543GH
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
LCC/M°/CIRCUITI INTEGRATI MAXIM
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
KIT/E/MAXIM ANALOG ESSENTIALS # COLLECTION OF PLUG-IN EVALUATION MODULES
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
Single +5V, fully integrated, 1.25Gbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Single +5V, fully integrated, 155Mbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
VRD11/VRD10, K8 Rev F 2/3/4-Phase PWM Controllers with Integrated Dual MOSFET Drivers
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Highly Integrated Level 2 SMBus Battery Chargers
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Current Monitor and Accumulator with Integrated Sense Resistor; ; Temperature Range: -40°C to +85°C
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
QFN 16/A°/AC-DC and DC-DC Peak-Current-Mode Converters with Integrated Step
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TDFN/A/65V, 1A, 600KHZ, SYNCHRONOUS STEP-DOWN REGULATOR WITH INTEGRATED SWI
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
Integrated Temperature Controller f
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
EVALUATION KIT/2.4GHZ TO 2.5GHZ 802.11G/B RF TRANSCEIVER WITH INTEGRATED PA
Manufacturer:
Maxim Integrated Products