OX16C95X OXFORD [Oxford Semiconductor], OX16C95X Datasheet - Page 6

• Manufacturer Part Number: OX16C95X
• Description: HIGH-PERFORMANCE UART FAMILY REFERENCE DRIVERS
• Manufacturer: OXFORD [Oxford Semiconductor]

Custom solutions & drivers for the OX16PCI954
4.2 OX16C95x (standard UARTs)
4.2.1 Windows 95/98 and Windows 2000 drivers for standard UARTs
Overview
The drivers for standard ports use the same port driver as the OX16PCI954 set, therefore the same features are available:
Installation
Windows will identify all COM ports as standard communications ports. Once a 95x COM port is installed as a generic port, update the
driver as follows:
Alternatively, the driver can be installed manually for a new device without running the auto-detect routines.
4.2.2 Windows NT4 note
There is no enhanced mode driver for standard UARTs in Windows NT4.0. This is because the generic driver will detect any ISA ports and
use them itself.
Oxford Semiconductor Ltd.
1.
2.
3.
4.
5.
6.
7.
Click on “Have Disk” and specify the location of the driver files. Click OK
The files will now be copied and the driver installed.
8.
When the “Update Device Driver Wizard” asks what you want Windows to do, select “Search for a better driver” and then click next.
When asked where to select the “Specify Location” box and type the location of the driver files. Click ‘next’ and the driver will be
installed.
9.
The system starts the Upgrade Device Driver Wizard. Click ‘Next’
Check “Search for a suitable driver for my device” and click Next. Point the wizard at the driver files (on floppy disk or fixed disk) and
click Next. You may have to enter a path to the driver files.
The system will find a selection of suitable drivers. Check “Install one of the other drivers” and then ‘Next’.
Install the “Oxford Semiconductor OX16C95x Communications port”
The files are copied. Click finish to exit the Wizard (and possibly restart)
128-byte receiver and transmitter FIFOs
Adjustable receiver and transmitter interrupt trigger level
Automatic flow control
Quad speed (using Times clock register)
Flexible baud rate generation up to 60Mbps (50Mbps on OX16C954)
RS485 half-duplex configuration
Click on Start / Settings / Control Panel
Double click “System” to bring up the system properties dialog box
Select the “Device Manager” tab of this dialog (with the “View devices by type” option selected.
Now click on the [+] next to the “Ports (COM & LPT)” icon to show the list of installed COM ports (If this section is not present or
no COM ports are listed, there are no serial devices installed in Windows. To install COM port hardware, consult your Windows /
Hardware documentation.)
Double click on the port you want to install the new driver for to bring up the settings dialog for that port
Select the driver tab and click the update/change driver button.
Windows 95
Windows 98
Windows 2000
VERSION 1.0
6