HN58X24128FPIAG RENESAS [Renesas Technology Corp], HN58X24128FPIAG Datasheet - Page 17

• Manufacturer Part Number: HN58X24128FPIAG
• Manufacturer: RENESAS [Renesas Technology Corp]

Read Operation
There are three read operations: current address read, random read, and sequential read. Read operations
are initiated the same way as write operations with the exception of R/W = “1”.
Current Address Read:
The internal address counter maintains the last address accessed during the last read or write operation,
with incremented by one. Current address read accesses the address kept by the internal address counter.
After receiving a start condition and the device address word (R/W is “1”), the EEPROM outputs the 8-bit
current address data from the most significant bit following acknowledgment “0” If the EEPROM receives
acknowledgment “1” (no acknowledgment) and a following stop condition, the EEPROM stops the read
operation and is turned to a standby state. In case the EEPROM have accessed the last address of the last
page at previous read operation, the current address will roll over and returns to zero address. In case the
EEPROM have accessed the last address of the page at previous write operation, the current address will
roll over within page addressing and returns to the first address in the same page. The current address is
valid while power is on. The current address after power on will be indefinite. The random read operation
described below is necessary to define the memory address.
Current Address Read Operation
128k to 256k
Start
1 0 1 0
Device
address
HN58X24128FPIAG/HN58X24256FPIAG
R
R/W
Read data (n+1)
ACK
No ACK
Stop
15