AM79C983A Advanced Micro Devices, AM79C983A Datasheet - Page 17
![no-image](/images/manufacturer_photos/0/0/14/advanced_micro_devices_sml.jpg)
AM79C983A
Manufacturer Part Number
AM79C983A
Description
Integrated Multiport Repeater 2 (IMR2)
Manufacturer
Advanced Micro Devices
Datasheet
1.AM79C983A.pdf
(60 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AM79C983AKC
Manufacturer:
AMD
Quantity:
20 000
FUNCTIONAL DESCRIPTION
Overview
The Am79C983A Integrated Multiport Repeater 2 de-
vice provides a system-level solution to designing IEEE
802.3 managed repeaters. It includes 12 pseudo AUI
(PAUI) ports for single-ended connections to external
transceivers. The IMR2 device interfaces directly with
AMD's Am79C988A Quad Integrated Ethernet Trans-
ceiver (QuIET) device for 10BASE-T implementations.
The PAUI ports can be turned off individually to enable
port switching applications. In addition, the IMR2 de-
vice has a standard AUI port and a reversible AUI
(RAUI) port for a direct connection to a MAC.
The IMR2 device provides a Hardware Implemented
Management Information Base (HIMIB) which contains
all of the necessary counters, attributes, actions, and
notifications specified by Section 19 of the IEEE 802.3
standard. Support for an RMON MIB, as specified by
the Internet Engineering Task Force (IETF) RFC 1757,
is also provided. Direct support is from an RMON Reg-
ister Bank. Additional support is provided by the Packet
Report Port, which supplies packet information that can
be used in conjunction with a microprocessor to derive
various RMON MIB attributes.
Basic Repeater Functions
The IMR2 repeater functions are summarized below.
An overview of IMR2 management functions is
presented under Basic Management Functions .
Repeater Function
If any single network port of a repeater system senses
the start of a valid packet on its receive lines, the IMR2
device will retransmit the received data to all other en-
abled network ports unless a collision is detected. The
repeated data will also be presented on the DAT line of
the expansion bus to facilitate designs utilizing multiple
IMR2 devices. The IMR2 device fully complies with
Section 9.5.1 of the IEEE 802.3 specifications.
Signal Regeneration
When retransmitting a packet, the IMR2 device en-
sures that the outgoing packet complies with the IEEE
802.3 specification in terms of preamble structure.
Data packets repeated by the IMR2 device will contain
a minimum of 56 preamble bits before the Start of
Frame Delimiter.
The IMR2 device, by virtue of its internal Phase Lock
Loop and Manchester Encoder/Decoder, will ensure
correct regeneration of the repeated signal at its PAUI
and AUI outputs. If the outputs of the IMR2 device are
connected to QuIET device transceivers, the 10BASE-T
outputs of the QuIET devices will meet the IEEE 802.3
signal symmetry requirements. If other types of trans-
ceivers are used, the signal characteristics will depend,
in part, on the transceiver.
P R E L I M I N A R Y
Am79C983A
Jabber Lockup Protection
The IMR2 chip implements a built-in jabber protection
scheme to ensure that the network is not disabled due
to transmission of excessively long data packets. This
protection scheme will automatically interrupt the
transmitter circuits of the IMR2 device for 96-bit times,
if the IMR2 device has been transmitting continuously
for more than 65,536 bit times. This is referred to as
MAU Jabber Lockup Protection (MJLP). The MJLP
status for the IMR2 chip can be read from the
Repeater Status Register.
Collision Handling
The IMR2 chip will detect and respond to collision con-
ditions as specified in the IEEE 802.3 specification. A
multiple IMR2 device repeater implementation also
complies with the specification because of the inter-
IMR2 chip status communication provided by the ex-
pansion port. Specifically, a repeater based on one or
more IMR2 devices will handle correctly the transmit
collision and one-port-left collision conditions as spec-
ified in Section 9 of the IEEE 802.3 specification.
Fragment Extension
If the total packet length received by the IMR2 device is
less than 96 bits, including preamble, the IMR2 chip will
extend the repeated packet length to 96 bits by ap-
pending a Jam sequence to the original fragment. Note
that in a few cases, it is possible for the IMR2 device to
generate a sequence 97 bits in length when the expan-
sion bus is operated in the asynchronous mode.
Auto Partitioning/Reconnection
Any of the IMR2 ports can be partitioned under exces-
sive duration or frequency of collision conditions. Once
a port is partitioned, the IMR2 device will continue to
transmit data packets to a partitioned port, but will not
respond (as a repeater) to activity on the partitioned
port’s receiver. The IMR2 chip will monitor the port and
reconnect it once certain criteria indicating port “well-
ness” are met. The criteria for reconnection are speci-
fied by the IEEE 802.3 standard. In addition to the
standard reconnection algorithm, the IMR2 device im-
plements an alternative reconnection algorithm which
provides a more robust partitioning function. Each port
is partitioned and/ or reconnected separately and inde-
pendently of other network ports.
Either one of the following conditions occurring on any
enabled IMR2 device network port will cause the port
to partition:
a. An SQE signal active for more than 2048 bit times.
b. A collision condition occurs during each of 32 con-
secutive attempts to transmit to that port.
Once a network port is partitioned, the IMR2 device will
reconnect that port if the following is met:
17