HMC615LP4E HITTITE [Hittite Microwave Corporation], HMC615LP4E Datasheet - Page 5

• Manufacturer Part Number: HMC615LP4E
• Description: GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.3 - 4.0 GHz
• Manufacturer: HITTITE [Hittite Microwave Corporation]

10
10 - 5
Pin Descriptions
11 - 17, 19 - 24
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Pin Number
2, 6 - 9,
10
18
1
3
4
5
Phone: [phone]
Function
Mix LO
BiAs
GND
N/C
LO
rF
iF
Application Support: Phone: [phone] or [e-mail]
required. Three external bypass capacitors are recom-
mended for optimum performance, as illustrated in the
This pin is DC coupled. For applications not requiring
range. For operation to DC, this pin must not source/
No connection. These pins may be connected to rF
Power supply for the LO amplifier , a Bias resistor is
externally using a series capacitor whose value has
sink more than 18 mA of current or die non-function
This pin is DC coupled and matched to 50 Ohms.
This pin is DC coupled and matched to 50 Ohms.
been chosen to pass the necessary iF frequency
Backside of package has exposed metal ground
operation to DC, this port should be DC blocked
paddle that must also be connected to ground.
An off chip DC blocking capacitor is required.
An off chip DC blocking capacitor is required.
v02.1210
ground. Performance will not be affected.
and possible die failure will result.
Fax: [phone]
This pin is DC coupled and
matched to 50 Ohms.
application circuit.
Description
GaAs MMIC MIXER w/ INTEGRATED
Order On-line at www.hittite.com
HMC615LP4
LO AMPLIFIER, 2.3 - 4.0 GHz
interface schematic
/
615LP4E