H5CL-A OMRON [Omron Electronics LLC], H5CL-A Datasheet - Page 2

• Manufacturer Part Number: H5CL-A
• Description: Digital Timer
• Manufacturer: OMRON [Omron Electronics LLC]

H5CL
Specifications
2
Classification
Mounting
External connections
Enclosure ratings
Digits
Max. time settings
Display modes
Input signals
Input method
Operating modes
Reset system
Sensor waiting time
External power supply
Display
Memory backup
Mounting method
Approved standards
Rated supply voltage
Operating voltage range
Power consumption
Start, reset, gate inputs
Key protection input
Power reset
Control output
Ratings
Item
Item
Digital timer
DIN track, surface, and flush mounting
(common)
Socket
Panel surface: IEC IP66 and NEMA Type 4 (indoors) when Y92S-29 rubber packing is used.
4 digits (zero suppress method)
9.999 s (0.001-s unit), 99.99 s (0.01-s unit), 999.9 s (0.1-s unit), 9999 s (1-s unit),
99 min 59 s (1-s unit), 999.9 min (0.1-min unit), 99 h 59 min (1-min unit), 999.9 h (0.1-h unit)
Up (increment) and Down (decrement) (selectable)
Start, gate, reset, and key protection
No-voltage input: via NPN transistor or switching of contact
A (signal ON-delay), F (accumulative operation) (selectable)
Power reset (A (signal ON-delay) mode only), external, manual resets
216 ms typ., 250 ms max. (Control output is turned OFF and no input is accepted during
sensor waiting time.)
50 mA at 12 VDC ( 10%)
7-segment LEDs (12 mm high, red LEDs for the present value, and 8 mm high, green LEDs for
the set value)
EEP-ROM (overwritten 200,000 times min.), which can store data for 20 years min.
DIN track mounting, surface mounting, and
flush mounting
UL 508, CSA C22.2 No.14
Conforms to EN61010-1
100 to 240 VAC, 50/60 Hz
85 to 264 VAC, 50/60 Hz
Approx. 10 VA
Min. pulse width: 1 ms/20 ms (selectable, same for all three inputs)
Response time: 1 s max.
Min. power opening time: 0.5 s (excluding F (accumulative operation) mode)
Contact output:
Transistor output: NPN open collector, 100 mA max. at 30 VDC max.,
H5CL-A
H5CL-A
SPDT, 3 A at 250 VAC, resistive load (cos =1)
Min. applicable load: 10 mA at 5/24 VDC (P level, for reference value)
residual voltage 1.5 VDC max.
(AC models)
(AC models)
12 to 24 VDC (permissible ripple: 20% (p-p) max.)
10.8 to 26.4 VDC
Approx. 3 W
Flush mounting
Screw terminals
---
Flush mounting
H5CL-AD
H5CL-AD
(DC models)
(DC models)
H5CL