SST25VF020204CSAE Silicon Storage Technology, Inc, SST25VF020204CSAE Datasheet

SST25VF020204CSAE

Manufacturer Part Number

SST25VF020204CSAE

Description

SOP8

Manufacturer

Silicon Storage Technology, Inc

Datasheets

1.SST25VF020204CSAE.pdf (23 pages)

2.SST25VF020204CSAE.pdf (24 pages)

Specifications of SST25VF020204CSAE

Date_code

08+

Current page: 1 of 23
Download datasheet (398Kb)

FEATURES:

• Single 2.7-3.6V Read and Write Operations

• Serial Interface Architecture

• 20 MHz Max Clock Frequency

• Superior Reliability

• Low Power Consumption:

• Flexible Erase Capability

• Fast Erase and Byte-Program:

• Auto Address Increment (AAI) Programming

PRODUCT DESCRIPTION

The SST serial flash family features a four-wire, SPI-

compatible interface that allows for a low pin-count pack-

age occupying less board space and ultimately lowering

total system costs. SST25VF020 SPI serial flash memo-

ries are manufactured with SST’s proprietary, high perfor-

mance CMOS SuperFlash Technology. The split-gate

cell design and thick-oxide tunneling injector attain better

reliability and manufacturability compared with alternate

approaches.

The SST25VF020 device significantly improves perfor-

mance, while lowering power consumption. The total

energy consumed is a function of the applied voltage, cur-

S71231-07-000

– SPI Compatible: Mode 0 and Mode 3

– Endurance: 100,000 Cycles (typical)

– Greater than 100 years Data Retention

– Active Read Current: 7 mA (typical)

– Standby Current: 8 µA (typical)

– Uniform 4 KByte sectors

– Uniform 32 KByte overlay blocks

– Chip-Erase Time: 70 ms (typical)

– Sector- or Block-Erase Time: 18 ms (typical)

– Byte-Program Time: 14 µs (typical)

– Decrease total chip programming time over

Byte-Program operations

SST25VF020 / 0402Mb / 4Mb Serial Peripheral Interface (SPI) flash memory

10/06

2 Mbit SPI Serial Flash

SST25VF020

The SST logo and SuperFlash are registered Trademarks of Silicon Storage Technology, Inc.

• End-of-Write Detection

• Hold Pin (HOLD#)

• Write Protection (WP#)

• Software Write Protection

• Temperature Range

• Packages Available

• All non-Pb (lead-free) devices are RoHS compliant

rent, and time of application. Since for any given voltage

range, the SuperFlash technology uses less current to

program and has a shorter erase time, the total energy

consumed during any Erase or Program operation is less

than alternative flash memory technologies. The

SST25VF020 device operates with a single 2.7-3.6V

power supply.

The SST25VF020 device is offered in an 8-lead SOIC 150

mil body width (SA) package, and in an 8-contact WSON

package. See Figure 2 for the pin assignments.

– Software Status

– Suspends a serial sequence to the memory

– Enables/Disables the Lock-Down function of the

– Write protection through Block-Protection bits in

– Commercial: 0°C to +70°C

– Industrial: -40°C to +85°C

– Extended: -20°C to +85°C

– 8-lead SOIC 150 mil body width

– 8-contact WSON (5mm x 6mm)

without deselecting the device

status register

These specifications are subject to change without notice.

Data Sheet

Related parts for SST25VF020204CSAE

Related keywords

SST25VF020204CSAE datasheet
SST25VF020204CSAE data sheet
SST25VF020204CSAE pdf datasheet
SST25VF020204CSAE component
SST25VF020204CSAE part
SST25VF020204CSAE distributor
SST25VF020204CSAE RoHS
SST25VF020204CSAE datasheet download