PEEL16CV8 ANACHIP [Anachip Corp], PEEL16CV8 Datasheet - Page 2

• Manufacturer Part Number: PEEL16CV8
• Description: CMOS Programmable Electrically Erasable Logic Device
• Manufacturer: ANACHIP [Anachip Corp]

Anachip Corp.
www.anachip.com.tw
Functional Description
The PEEL
expressions in a programmable-AND/fixed-OR logic array. User-defined
functions are created by programming the connections of input signals
into the array. User-configurable output structures in the form of macro-
cells further increase logic flexibility.
Architecture Overview
The PEEL
which allow a total of up to 16 inputs and 8 outputs for creating logic
functions. At the core of the device is a programmable electrically-eras-
able AND array which drives a fixed OR array. With this structure the
PEEL
sions.
Associated with each of the eight OR functions is a macrocell which can
be independently programmed to one of up to four different basic config-
urations. The programmable macrocells allow each I/O to create
sequential or combinatorial logic functions of active-high or active-low
polarity, while providing two possible feedback paths into the array.
Three different device modes, Simple, Complex, and Registered, sup-
port various user configurations. In Simple mode a macrocell can be
configured for combinatorial function with the output buffer permanently
enabled, or the output buffer can be disabled and the I/O pin used as a
dedicated input. In Complex mode a macrocell is configured for combi-
natorial function with the output buffer enable controlled by a product
term. In Registered mode, a macrocell can be configured for registered
operation with the register clock and output buffer enable controlled
directly from pins, or can be configured for combinatorial function with the
output buffer enable controlled by a product term. In most cases the
device mode is set automatically by the development software, based on
the features specified in the design.
The three device modes support designs created explicitly for the
PEEL
devices such as the 16R4, 16R8, and 16L8. Table 1 shows the device
mode used to emulate the various PLDs. Design conversion into the
16CV8 is accommodated by JEDEC-to-JEDEC translators available
from Anachip, as well as several programmers which can read the origi-
nal PLD JEDEC file and automatically program the 16CV8 to perform the
same function.
AND/OR Logic Array
The programmable AND array of the PEEL
lines intersecting product terms. The input lines and product terms are
used as follows:
32 input lines:
-16 input lines carry the true and complement of the signals applied
-16 additional lines carry the true and complement of 8 macrocell
TM
TM
to the 8 dedicated input pins
feedback signals or inputs from I/O pins or the clock/ OE pins
16CV8 can implement up to 8 sum-of-products logic expres-
16CV8, as well as designs created originally for popular PLD
TM
TM
16CV8 features ten dedicated input pins and eight I/O pins,
16CV8 implements logic functions as sum-of- products
TM
16CV8 is formed by input
2/11
Table 1 : PEEL
At each input-line/product-term intersection there is an EEPROM mem-
ory cell which determines whether or not there is a logical connection at
that intersection. Each product term is essentially a 32-input AND gate. A
product term which is connected to both the true and complement of an
input signal will always be FALSE and thus will not affect the OR
function that it drives. When all the connections on a product term are
opened, that term will always be TRUE.
When programming the PEEL
performs a bulk erase to remove the previous pattern. The erase cycle
opens every logical connection in the array. The device is configured to
perform the user-defined function by programming selected connections
in the AND array. (Note that PEEL
program all of the connections on unused product terms so that they will
have no effect on the output function.
64 product terms:
-56 product terms (arranged in 8 groups of 7) form sum-of-product
-8 product terms (arranged 1 per macrocell) add an additional
PLD Architecture
functions for macrocell combinatorial or registered logic
product term for macrocell sum-of-products functions or I/O pin
output enable control
Compatibility
16HD8
16RP4
16LD8
10H8
10P8
12H6
12P6
14H4
14P4
16H2
16P2
16H8
16P8
16R4
16R6
16R8
10L8
12L6
14L4
16L2
16L8
TM
16CV8 Device Compatibility
TM
TM
16CV8, the device programmer first
device programmers automatically
PEEL
Device Mode
Registered
Registered
Registered
Registered
Complex
Complex
Complex
Simple
Simple
Simple
Simple
Simple
Simple
Simple
Simple
Simple
Simple
Simple
Simple
Simple
Simple
Rev. 1.0 Dec 16, 2004
TM
16CV8