H7CX OMRON [Omron Electronics LLC], H7CX Datasheet - Page 20

• Manufacturer Part Number: H7CX
• Description: Multifunction Preset Counter
• Manufacturer: OMRON [Omron Electronics LLC]

Operating Procedures
I Setting Procedure Guide
Setting for Counter Operation
(1-stage/2-stage Counter, Total and Preset Counter, Batch Counter, Dual Counter)
Note: 1. At the time of delivery, the H7CX is set to the 1-stage counter (2-stage counter for H7CX-AW@/-A4W@ models) configuration.
Setting for Tachometer Operation
Note: At the time of delivery, the H7CX is set to the 2-stage counter (1-stage counter for H7CX-AU@ models) configuration.
C-106
2. Set to output 2 time when using as a 2-stage counter or batch counter.
When Using Basic Settings Only
When Using Settings Other than the Above
When Using Basic Settings Only
Basic Settings
Other Settings
Basic Settings
• Counting speed (30 Hz, 5 kHz)
• Input mode (UP, DOWN)
• Output mode (N, F, C, K-1)
• One-shot output time (0.5 s, 0.05 s)(See note 2.)
• Reset input signal width (20 ms, 1 ms)
• NPN/PNP input mode (NPN, PNP)
• Input mode (UP/DOWN A, UP/DOWN B, UP/DOWN C)
• Output mode (R, P, Q, A, K-2, D, L, H)
• One-shot output time (except for 0.5 s and 0.05 s) (See note 2.)
• Counting speed (30 Hz, 10 kHz)
• Output mode (HI-LO, AREA, HI-HI, LO-LO)
• Average processing (OFF, 2, 4, 8 times)
• NPN/PNP input mode (NPN, PNP)
All the functions can be set with the operation keys.
➡
For details on the setting methods, refer to page 22.
Multifunction Preset Counter
When Using Advanced Functions
Settings for advanced functions other than the basic
settings above can be performed with the operation keys.
• Decimal point position
• Prescale value
• Auto-zero time
• Startup time
• Display color
• Output allocation
• Key protect level
➡
Advanced Functions
For details on the setting methods, refer to page 34.
H7CX
The settings can be performed easily with the DIP switch.
The settings can be performed easily with the DIP switch.
➡
➡
For details on the setting methods, refer to page 21.
For details on the setting methods, refer to page 33.
OFF
OFF
When Using Advanced Functions
ON
ON
Settings for advanced functions other than the basic
settings above can be performed with the operation keys.
• Dual count calculating mode
• Output 1 time (for 2-stage counter)
• Decimal point position
• Prescale value
• Display color
• Output allocation
• Key protect level
➡
Advanced Functions
For details on the setting methods, refer to page 22.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8