HMC409LP4_10 HITTITE [Hittite Microwave Corporation], HMC409LP4_10 Datasheet - Page 8

• Manufacturer Part Number: HMC409LP4_10
• Description: GaAs InGaP HBT 1 WATT POWER AMPLIFIER, 3.3 - 3.8 GHz
• Manufacturer: HITTITE [Hittite Microwave Corporation]

Evaluation PCB
List of Materials for Evaluation PCB 108355
[1] reference this number when ordering complete evaluation pCB
[2] Circuit Board material: rogers 4350, er = 3.48
item
J1 - J2
J3, J4
C1 - C5
C6 - C7
C8
C9
C10
C11
l1, l2
l3
r1
U1
pCB
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
[2]
Description
pCB mount smA rf Connector
2 mm DC Header
100 pf Capacitor, 0402 pkg.
1000 pf Capacitor, 0603 pkg.
10 pf Capacitor, 0402 pkg.
0.5 pf Capacitor, 0603 pkg.
1.6 pf Capacitor, 0603 pkg.
4.7 µf, Tantalum
3.9 nH inductor, 0603 pkg.
2.2 nH inductor, 0402 pkg. Toko
56 ohm resistor, 0603 pkg.
HmC409lp4 / HmC409lp4e Amplifier
108353 eval Board
Phone: [phone]
Application Support: Phone: [phone] or [e-mail]
v03.0710
Fax: [phone]
[1]
POWER AMPLIFIER, 3.3 - 3.8 GHz
The circuit board used in the application should
use rf circuit design techniques. signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
Order On-line at www.hittite.com
HMC409LP4
GaAs InGaP HBT 1 WATT
/
409LP4E
9 - 8
9