WT11i-A-AI3 Bluegiga Technologies, WT11i-A-AI3 Datasheet - Page 32

• Manufacturer Part Number: WT11i-A-AI3
• Description: Bluetooth / 802.15.1 Modules WT11i Class1 2.1+EDR Chip Ant, iWRAP 3.0
• Manufacturer: Bluegiga Technologies

Specifications of WT11i-A-AI3

• Rohs: yes
• Class: 1
• Frequency Band: 2.4 GHz
• Sensitivity: - 83 dBm
• Operating Supply Voltage: 3.3 V
• Output Power: 17 dBm
• Interface Type: GPIO, UART, USB
• Antenna Connector Type: Chip
• Maximum Operating Temperature: + 85 C
• Dimensions: 35.8 mm x 14.5 mm x 2.3 mm
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT

Equation 2: PCM_CLK Frequency When Being Generated Using the Internal 48MHz Clock
The frequency of PCM_SYNC relative to PCM_CLK can be set using Equation XXX:
Equation 3: PCM_SYNC Frequency Relative to PCM_CLK
CNT_RATE, CNT_LIMIT and SYNC_LIMIT are set using PSKEY_PCM_LOW_JITTER_CONFIG. As an
example,
to
generate
PCM_CLK
at
512kHz
with
PCM_SYNC
at
8kHz,
set
PSKEY_PCM_LOW_JITTER_CONFIG to 0x08080177.
8.9 PCM Configuration
The PCM configuration is set using two PS Keys, PSKEY_PCM_CONFIG32 detailed in Table 12 and
PSKEY_PCM_LOW_JITTER_CONFIG in Table 13. The default for PSKEY_PCM_CONFIG32 is 0x00800000,
i.e., first slot following sync is active, 13-bit linear voice format, long frame sync and interface master
generating 256kHz PCM_CLK from 4MHz internal clock with no tri-state of PCM_OUT.
Bluegiga Technologies Oy
Page 32 of 41