WizFi210 WIZnet, WizFi210 Datasheet - Page 35

• Manufacturer Part Number: WizFi210
• Description: WiFi / 802.11 Modules 802.11B WIFI MOD LOW POWER
• Manufacturer: WIZnet

Specifications of WizFi210

• Rohs: yes
• Protocol Supported: 802.11 b/g/n
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps
• Interface Type: I2C, SPI, UART
• Transmit Power (max): 8 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 3.3 V
• Supply Current Transmitting: 135 mA
• Supply Current Receiving: 125 mA
• Maximum Operating Temperature: + 85 C
• Dimensions: 32 mm x 23.5 mm x 3 mm
• Minimum Operating Temperature: - 40 C
• Modulation Technique: CCK, DSSS
• Security: WEP, WPA, WPA2

Command
AT+WRXACTIVE=
AT+WRXPS=
AT+MCSTSET=
AT+WP=
AT+WSYNCINTRL=
AT+EXTPA=
AT+PSPOLLINTRL=
Command
AT+NDHCP=
AT+NSET=
AT+DNSLOOK
UP=
AT+DNSSET=
AT+STORENW
CONN
AT+RESTOREN
WCONN
WizFi 210 User Manual
(6) Wireless configuration
(7) Network interface
Parameters
n=0 (disable) =1 (enable)
<Src Address>,<Net-mask>,
<Gateway>
<URL>,[<retry>,[<timeout=S>]
<DNS1 IP>,[<DNS2 IP>]
Parameters
n=0 (disable) =1 (enable)
n=0 (disable) =1 (enable)
n=0 (disable) =1 (enable)
<power> 0 to 7 (WizFi210)
<n> 1 to 65535.
n=0 (disable) =1 (enable)
<n> 1 to 65535.
(WIZnet Co., Ltd.)
2 to 15 (WizFi220)
Table 20. Wireless configuration
Table 21. Network interface
Responses / Effects
If 1, DHCP is enabled.
Static network parameters; overrides previous
values.
Ex)
AT+NSET=192.168.3.100,255.255.255.0,192.168
.3.1
Query DNS server for address of hostname
URL.
Ex) AT+DNSLOOKUP=google.com
Set the DNS server addresses to be used.
Ex) AT+DNSSET=192.168.3.1
Store network connection parameters prior to
transition to Standby.
Restore network connection parameters after
wake from Standby.
Responses / Effects
If 1, 802.11 radio is enabled.
Ex) AT+WRXACTIVE=1
If 1, Power Save mode is enabled.
Ex) AT+WRXPS=1
If 1, multicast reception is enabled.
Transmit power set to <power>.
Ex) AT+WP=0
Configure the sync loss interval
Ex) AT+WSYNCINTRL=30
Enable/disable the external PA
Ex) AT+EXTPA=0
Configure the keep-alive timer interval
Ex) AT+PSPOLLINTRL=45
29