FT200XD-R FTDI, FT200XD-R Datasheet - Page 30

• Manufacturer Part Number: FT200XD-R
• Description: USB Interface IC USB to I2C IC DFN-10
• Manufacturer: FTDI

Specifications of FT200XD-R

• Rohs: yes
• Product: USB 2.0
• Data Rate: 12 Mbps, 480 Mbps
• Interface Type: I2C, USB
• Operating Supply Voltage: 2.97 V to 5.5 V
• Operating Supply Current: 6.8 mA to 9.1 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: DFN-10
• Tradename: X-Chip

FT200XD USB I2C SLAVE IC Datasheet
Version 1.3
Document No.: FT_000628 Clearance No.: FTDI# 265
Further details of these states can be found in Chapter 9 of the USB 2.0 Specification from the USB
Implementers Forum website (http://www.usb.org).
Figure 9.6: Checking the USB State
Device ID command
This command uses the Slave address of the FT-X. The master issues the 1111 100 0 command (0x7c
write) followed by the slave address with the direction bit as either 0 or 1 (don’t care). The master then
sends a repeated start followed by the 1111 100 1 command (0x7c read). The FT-X responds with 3
bytes containing the manufacturer ID (12 bits), part ID (9 bits) and revision (3 bits). The master ends
reading with a NACK.
Note: In the case where the master keeps ACKing the data, it has to wrap around and the slave (the FT-
X) will keep sending the 3 bytes of its ID.
Figure 9.7: Reading the Device ID
Copyright © 2013 Future Technology Devices International Limited
30