AN30181A-VL Panasonic Electronic Components, AN30181A-VL Datasheet - Page 2

• Manufacturer Part Number: AN30181A-VL
• Description: Low Dropout Controllers - LDO Vout 1.2-1.8 800mA 2Ch Buck DC-DC
• Manufacturer: Panasonic Electronic Components

Specifications of AN30181A-VL

• Rohs: yes
• Input Voltage Max: 5.5 V
• Output Voltage: 1.2 v to 1.8 V
• Output Current: 0.8 A
• Load Regulation: 10 mV
• Number Of Outputs: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: HQFN-24
• Input Voltage Min: 2.9 V
• Maximum Power Dissipation: 1.472 W
• Minimum Operating Temperature: - 40 C
• Supply Current: 0.8 A

ABSOLUTE MAXIMUM RATINGS
POWER DISSIPATION RATING
Notes) Do not apply external currents and voltages to any pin not specifically mentioned.
Note). For the actual usage, please refer to the PD-Ta characteristics diagram in the package specification, follow the power supply
Supply voltage
Operating free-air temperature
Operating junction temperature
Storage temperature
Input Voltage Range
Output Voltage Range
ESD
9pin Wafer level chip size package
(WLCSP Type)
*1:The values under the condition not exceeding the above absolute maximum ratings and the power dissipation.
*3:V
*1:Glass Epoxy Substrate(4 Layers) [Glass-Epoxy: 50 X 50 X 0.8t(mm)]
*2:Except for the power dissipation, operating ambient temperature, and storage temperature, all ratings are for Ta = 25°C.
This product may sustain permanent damage if subjected to conditions higher than the above stated absolute maximum rating.
This rating is the maximum rating and device operating at this range is not guaranteeable as it is higher than our stated
recommended operating range. When subjected under the absolute maximum rating for a long time, the reliability of the product
may be affected.
Die Pad Exposed , Soldered.
IN
voltage, load and ambient temperature conditions to ensure that there is enough margin and the thermal design does not
exceed the allowable value.
is voltage for AVIN, PVIN1 = PVIN2,(V
Parameter
CAUTION
PACKAGE
Although this has limited built-in ESD protection circuit, but permanent damage may occur on it.
Therefore, proper ESD precautions are recommended to avoid electrostatic damage to the MOS gates
84.9 °C /W
LX1,LX2,PCNT,PCNTB,DIS,
HBM (Human Body Model)
θ
RESET,BUF,VREG
JA
IN
+ 0.3) V must not be exceeded 6 V.
EN,FB1,FB2
Symbol
T
T
V
T
opr
stg
IN
j
2
PD(Ta=25°C)
1.472 W
– 0.3 to (V
– 0.3 to (V
– 40 to + 150
– 55 to + 150
– 40 to + 85
Rating
PD(Ta=85°C)
6.0
2
0.765 W
IN
IN
+ 0.3)
+ 0.3)
AN30181A
Notes
Unit
*1
°C
°C
°C
kV
V
V
V
Notes
Ver. BEB
*1
*3
*2
*2
*2
*1
*3
*1
*3
-