MAX7314EVKIT+ Maxim Integrated, MAX7314EVKIT+ Datasheet - Page 13

• Manufacturer Part Number: MAX7314EVKIT+
• Description: Peripheral Drivers & Components - PCIs Evaluation Kit for the MAX7314
• Manufacturer: Maxim Integrated

Specifications of MAX7314EVKIT+

• Operating Supply Voltage: 2 V to 3.6 V

Problem: Unable to find U1.
•
•
Figure 6. The 2-Wire Interface Window Provides Direct, Low-Level Access to the MAX7314 and 2-Wire Serial Interface
Is power applied to the MAX7314 EV kit V+ PC pad
or is jumper JU1 configured to pins 2 and 3 to
receive power from the USB interface? This is
required for powering U1.
If using the EV kit’s on-board interface, are the SCL
and SDA signals pulled up to +3.3V? If using a user-
supplied interface, are the SCL and SDA signals
______________________________________________________________________________________
MAX7314 Evaluation Kit
•
pulled up to the appropriate voltage level? There
must be pullup resistors for the 2-wire SCL and SDA
signals.
If using jumper wires to connect, are the SCL and
SDA signals swapped? Is the ground return missing?
13