MAX7314EVKIT+ Maxim Integrated, MAX7314EVKIT+ Datasheet - Page 8

• Manufacturer Part Number: MAX7314EVKIT+
• Description: Peripheral Drivers & Components - PCIs Evaluation Kit for the MAX7314
• Manufacturer: Maxim Integrated

Specifications of MAX7314EVKIT+

• Operating Supply Voltage: 2 V to 3.6 V

MAX7314 Evaluation Kit
The White LED/Flash Configuration group box is
used to turn the EV kit’s WLEDs (D5–D8) on and off,
adjust WLED intensity, and provide control of all four
WLEDs as a single flash unit. The Phase 0 and Phase
1 checkboxes are used to set or clear the respective bit
in that Blink Phase register. When checked, the associ-
ated output port is set low, turning the respective WLED
on. When unchecked, the associated output port is
high impedance. The WLED Intensity track bar inde-
Figure 1. MAX7314 Evaluation Software Main Window (Global and White LED Config/Status Tab)
8
_______________________________________________________________________________________
White LED/Flash Configuration
pendently controls the intensity of all WLEDs (D5–D8).
Refer to the MAX7314 IC data sheet for additional inten-
sity setting details.
Flash features such as Single Flash, Repeat Flash,
and time delays from 0.5s to 8s duration can be select-
ed. To utilize the flash feature, the Enable Flash Timer
checkbox must be checked. Pressing the Run Flash
button initiates the flash sequence. The Single Flash,
Repeat Flash, and flash timer settings can be changed
on the fly. When running the flash, all global BLINK