24LC04BHT-I/MNY Microchip Technology, 24LC04BHT-I/MNY Datasheet - Page 8

• Manufacturer Part Number: 24LC04BHT-I/MNY
• Description: IC EEPROM 4KBIT 400KHZ 8TDFN
• Manufacturer: Microchip Technology

Specifications of 24LC04BHT-I/MNY

• Memory Size: 4K (2 x 256 x 8)
• Package / Case: 8-TDFN
• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Organization: 2 Block x 256 x 8
• Interface Type: I2C
• Maximum Clock Frequency: 0.4 MHz
• Access Time: 900 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Maximum Operating Current: 3 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.3 V, 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 24LC04BHT-I/MNYTR

24AA04H/24LC04BH
5.0
Since the device will not acknowledge during a write
cycle, this can be used to determine when the cycle is
complete (this feature can be used to maximize bus
throughput). Once the Stop condition for a Write
command has been issued from the master, the device
initiates the internally-timed write cycle and ACK polling
can then be initiated immediately. This involves the
master sending a Start condition followed by the control
byte for a Write command (R/W =
busy with the write cycle, no ACK will be returned. If the
cycle is complete, the device will return the ACK and
the master can then proceed with the next Read or
Write command. See Figure 5-1 for a flow diagram of
this operation.
FIGURE 5-1:
DS22119A-page 8
ACKNOWLEDGE POLLING
Initiate Write Cycle
Send Control Byte
Write Command
with R/W = 0
Acknowledge
Condition to
(ACK = 0)?
Send Stop
Did Device
Send Start
Operation
Send
Next
ACKNOWLEDGE POLLING
FLOW
Yes
0
). If the device is still
No
6.0
The WP pin allows the user to write-protect half of the
array (100h-1FFh) when the pin is tied to V
is tied to V
WRITE PROTECTION
SS
the write protection is disabled.
© 2008 Microchip Technology Inc.
CC
. If the pin