MCIMX6S6AVM08AB Freescale Semiconductor, MCIMX6S6AVM08AB Datasheet - Page 18

• Manufacturer Part Number: MCIMX6S6AVM08AB
• Description: Processors - Application Specialized i.MX6 Solo rev 1.1
• Manufacturer: Freescale Semiconductor
• Type: Automotive and Infotainment Processorsr

Specifications of MCIMX6S6AVM08AB

• Rohs: yes
• Core: ARM Cortex A9
• Processor Series: i.MX6
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 800 MHz
• Instruction / Data Cache Memory: 32 KB
• Data Ram Size: 128 KB
• Data Rom Size: 96 KB
• Operating Supply Voltage: 1.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: BGA 2240
• Interface Type: I2S, SSI, AC97, ESAI, UARTS, eCSPI, I2C, Ethernet, PWM, SJC, GPIO, KPP, SPDIF
• Memory Type: DDR3
• Minimum Operating Temperature: - 40 C
• Number Of Timers: 2

Modules List
18
Block Mnemonic
XTALOSC
WDOG-1
WDOG-2
WEIM
VPU
(TZ)
i.MX 6Solo/6DualLite Automotive and Infotainment Applications Processors, Rev. 1
Watch Dog (TrustZone)
Video Processing Unit
NOR-Flash /PSRAM
Crystal Oscillator I/F
Block Name
Watch Dog
interface
Table 2. i.MX 6Solo/6DualLite Modules List (continued)
Clocks, Resets, and
Timer Peripherals
Timer Peripherals
Power Control
Subsystem
Connectivity
Peripherals
Peripherals
Multimedia
A high-performing video processing unit (VPU), which
covers many SD-level and HD-level video decoders and
SD-level encoders as a multi-standard video codec
engine as well as several important video processing,
such as rotation and mirroring.
See the i .MX 6Solo/6DualLite Reference Manual
(IMX6SDLRM) for complete list of VPU’s
decoding/encoding capabilities.
The Watch Dog Timer supports two comparison points
during each counting period. Each of the comparison
points is configurable to evoke an interrupt to the ARM
core, and a second point evokes an external event on
the WDOG line.
The TrustZone Watchdog (TZ WDOG) timer module
protects against TrustZone starvation by providing a
method of escaping normal mode and forcing a switch
to the TZ mode. TZ starvation is a situation where the
normal OS prevents switching to the TZ mode. Such
situation is undesirable as it can compromise the
system’s security. Once the TZ WDOG module is
activated, it must be serviced by TZ software on a
periodic basis. If servicing does not take place, the timer
times out. Upon a time-out, the TZ WDOG asserts a TZ
mapped interrupt that forces switching to the TZ mode.
If it is still not served, the TZ WDOG asserts a security
violation signal to the CSU. The TZ WDOG module
cannot be programmed or deactivated by a normal
mode SW.
The WEIM NOR-FLASH / PSRAM provides:
The XTALOSC module enables connectivity to external
crystal oscillator device. In a typical application
use-case, it is used for 24 MHz oscillator to provide USB
required frequency.
• Support 16-bit (in muxed IO mode only) PSRAM
• Support 16-bit (in muxed IO mode only) NOR-Flash
• Multiple chip selects
memories (sync and async operating modes), at slow
frequency
memories, at slow frequency
Brief Description
Freescale Semiconductor