AT89C51RC2-RLTIL Atmel, AT89C51RC2-RLTIL Datasheet - Page 84

• Manufacturer Part Number: AT89C51RC2-RLTIL
• Description: 8-bit Microcontrollers - MCU 80C31 w/4k
• Manufacturer: Atmel

Specifications of AT89C51RC2-RLTIL

• Product Category: 8-bit Microcontrollers - MCU
• Core: 8051
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 60 MHz
• Program Memory Size: 32 KB
• Data Ram Size: 1280 B
• On-chip Adc: No
• Operating Supply Voltage: 2.7 V to 5.5 V
• Package / Case: VQFP-44
• Mounting Style: SMD/SMT
• Interface Type: SPI, UART
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Program Memory Type: Flash
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2.7 V

Power-off Flag
84
AT89C51RB2/RC2
The Power-off flag allows the user to distinguish between a “cold start” reset and a
“warm start” reset.
A cold start reset is the one induced by V
V
The Power-off flag (POF) is located in PCON register (Table 63). POF is set by hard-
ware when V
software allowing the user to determine the type of reset.
Table 63. PCON Register
PCON - Power Control Register (87h)
Reset Value = 00X1 0000b
Not bit addressable
CC
Number
SMOD1
Bit
is still applied to the device and could be generated by an exit from Power-down.
7
7
6
5
4
3
2
1
0
Mnemonic Description
SMOD0
CC
SMOD1
SMOD0
POF
GF1
GF0
Bit
IDL
PD
6
-
rises from 0 to its nominal voltage. The POF can be set or cleared by
Serial port Mode Bit 1
Set to select double baud rate in mode 1, 2 or 3.
Serial port Mode Bit 0
Cleared to select SM0 bit in SCON register.
Set to select FE bit in SCON register.
Reserved
The value read from this bit is indeterminate. Do not set this bit.
Power-off Flag
Cleared to recognize next reset type.
Set by hardware when V
software.
General-purpose Flag
Cleared by user for general-purpose usage.
Set by user for general-purpose usage.
General-purpose Flag
Cleared by user for general-purpose usage.
Set by user for general-purpose usage.
Power-down mode bit
Cleared by hardware when reset occurs.
Set to enter power-down mode.
Idle Mode Bit
Cleared by hardware when interrupt or reset occurs.
Set to enter idle mode.
5
-
POF
4
CC
CC
rises from 0 to its nominal voltage. Can also be set by
switch-on. A warm start reset occurs while
GF1
3
GF0
2
PD
1
4180E–8051–10/06
IDL
0