AT88SC0404CA-MP Atmel, AT88SC0404CA-MP Datasheet - Page 46
![no-image](/images/manufacturer_photos/0/0/78/atmel_sml.jpg)
AT88SC0404CA-MP
Manufacturer Part Number
AT88SC0404CA-MP
Description
IC EEPROM 4KBIT 4MHZ M2P
Manufacturer
Atmel
Series
CryptoMemory®r
Datasheet
1.AT88SC0104CA-SU.pdf
(66 pages)
Specifications of AT88SC0404CA-MP
Format - Memory
EEPROMs - Serial
Memory Type
EEPROM
Memory Size
4K (512 x 8)
Speed
4MHz
Interface
I²C, 2-Wire Serial
Voltage - Supply
2.7 V ~ 3.6 V
Operating Temperature
0°C ~ 70°C
Package / Case
M2 P, Smart Card Module
Operating Temperature (max)
70C
Operating Temperature (min)
0C
Operating Temperature Classification
Commercial
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
10.3.2. Example: Write EEPROM command
8664C–CRYPT–01/10
These status words indicate the state of the device at the end of the command. In normal conditions, the device sends
the INS byte as the procedure byte, and $90 $00 as the final status word. In certain conditions described below, the
device may interrupt the command by returning a status word in place of INS as the procedure byte.
$67 $00 is returned as a procedure byte when the number of data bytes to be transferred is incorrect.
$69 $00 is returned after read/write commands as procedure bytes if the host is not allowed to read/write at the
address provided. It is also returned after Password commands if the maximum number of attempts has been
exceeded. The device will return $69 $00 as a final status word in place of $90 $00, if the password presentation failed.
$6B $00 is returned as procedure bytes if the address is incorrect.
$6D $00 is returned as procedure bytes if the INS code received is not supported.
The following illustrates the data exchanges that occur during a WRITE Operation of 4-bytes: $04, $09, $19, $97 to
addresses $02, $03, $04, $05 in the current user zone.
Finish
Start
Host
Data
Data
Data
Data
CLA
INS
P1
P2
P3
Write Cycle
Device
SW1
SW2
INS
$B0
$B0
$02
$04
$04
$09
$19
$97
$00
Val
90
Atmel AT88SC0104/0204/0404/0808/CA
**
**
Note
Class (ignored by Atmel CryptoMemory)
Write instruction
Address byte A1 (ignored by 0104C - 1616C)
Address byte A2 = $02
4-data bytes
Device responds with INS code
Byte to be written at start address $02
Byte to be written at address $03
Byte to be written at address $04
Byte to be written at address $05
~5ms
WRITE Operation successful
45