W5100E01-AVR WIZnet, W5100E01-AVR Datasheet - Page 24

• Manufacturer Part Number: W5100E01-AVR
• Description: Development Boards & Kits - AVR W5100 EVAL BOARD BASED ON AVR
• Manufacturer: WIZnet

Specifications of W5100E01-AVR

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: ATMEGA128
• Core: AVR8
• Interface Type: LAN, RS-232
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 bit

<Fig 2.14 : DHCP Client Test>
2.4.2.2.
Loopback TCP Server
Loopback TCP Server Application is an application that loops back any file or packet data through TCP
channel connected with “AX1” Program of Test PC. First of all, set any channel as “Loopback TCP Server”
application type using [Manager>>Channel Config] menu of EVB B/D to test Loopback TCP Server.
When setting up “Loopback TCP Server” application type of EVB B/D, you can set listen port to any value.
Here, it’s set as the default value, 5000. Refer to
Chapter 2.4.1.2
After the setup of EVB B/D is complete, run “AX1” at Test PC then try the connection to the IP Address.
When the connection between EVB B/D and “AX1” is successful, loop back the data. Refer to “AX1 Manual
Vx.x.pdf”
14
© Copyright 2007 WIZnet Co., Inc. All rights reserved.