conga-Xeval congatec, conga-Xeval Datasheet - Page 19

• Manufacturer Part Number: conga-Xeval
• Description: Development Boards & Kits - x86 EVALUATION CARRIER BOARD FOR XTX
• Manufacturer: congatec

Specifications of conga-Xeval

• Product Category: Development Boards & Kits - x86
• Rohs: yes
• Product: XTX Carrier Boards
• Form Factor: XTX
• Tool Is For Evaluation Of: XTX Modules
• Core: AMD Ontario, Intel Celeron, Intel Core Duo
• Interface Type: Ethernet, IrDA, PCI, SATA, USB
• Operating Supply Voltage: 5 V
• Description/function: Evaluation carrier board for XTX-modules
• Dimensions: 294 mm x 244 mm
• Maximum Operating Temperature: + 60 C
• Minimum Operating Temperature: 0 C
• For Use With: conga-XKIT

3.3.4
Copyright © 2005 congatec AG
AC'97 Audio
(front view)
The XTX evaluation baseboard has an AC'97 Audio Codec (VIA VT1616) mounted. The
stereo audio output and optical S/PDIF interface of this codec is available on the
connectors described below. The Windows driver for this audio codec can be found on
the congatec website at www.congatec.com in the 'Products' section under
'Accessories'. There is also a jumper (X15) on the XTX evaluation baseboard that
allows you to choose to use either the XTX CPU module's onboard audio codec or the
XTX evaluation baseboard's audio codec. You must choose which one to use, both
cannot be used at the same time. The XTX CPU module's onboard audio codec is
enabled by default. The jumper (X15) configuration is described below.
The XTX evaluation baseboard AC'97 codec can be used in two different modes; either
stereo or 5.1 audio mode. The modes can be changed in the audio codec driver.
*Note
Only mono microphones can be used on the XTX Evaluation baseboard.
AC'97/HDA Audio
(X7)
2
1
3
(front view)
Jumper
S/PDIF
(X15)
4
3
(X5)
1
2
Stereo Jack 2 Stereo Mode
Tip
Ring
Sleeve
Stereo Jack 3 Stereo Mode
Tip
Ring
Sleeve
Stereo Jack 1 Stereo Mode
Tip
Ring
Sleeve
XEVALM13.odt
Jumper X15
Connector Type
3.5mm stereo plug.
Connector Type
Optical Toslink plug.
Connector Type
X15: 2.54mm grid jumper.
1 - 2
3 - 4
Line Input Left
Line Input Right
Ground
Line Output Left
Line Output Right
Ground
Microphone*
Not used
Ground
Configuration
XTX evaluation baseboard audio codec
XTX module CPU audio codec (default)
5.1 Channel Mode
Rear Channel Output Left
Rear Channel Output Right
Ground
5.1 Channel Mode
Front Channel Output Left
Front Channel Output Right
Ground
5.1 Channel Mode
Center Output
Low Frequency Effects
Output (Sub Woofer)
Ground
19/32