WizFi210-EVB WIZnet, WizFi210-EVB Datasheet - Page 36

• Manufacturer Part Number: WizFi210-EVB
• Description: WiFi / 802.11 Development Tools EVALUATION BOARD FOR WIZFI210
• Manufacturer: WIZnet

Specifications of WizFi210-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WizFi210
• Protocol Supported: 802.11 b/g/n
• Frequency: 2.4 GHz
• Interface Type: I2C, SPI, UART
• Operating Supply Voltage: 3.3 V
• Antenna Connector Type: U.FL

Command
AT+NCTCP=
AT+NCUDP=
AT+NSTCP=
AT+NSUDP=
AT+CID=?
AT+NCLOSE=
AT+NCLOSEAL
L
AT+SETSOCKO
PT=
AT+SSLOPEN=
AT+SSLCLOSE
=
AT+HTTPCCO
NF=
AT+HTTPCOPE
N=
AT+HTTPCSEN
D=
AT+HTTPCCLO
SE=
AT+NRAW=
AT+UNSOLICIT
EDTX=
WizFi 210 User Manual
(8) Connection management
Parameters
<Dest-Address>,<Port>
<Dest-Address>,<Port>
[<,Src.Port>]
<Port>
<Port>
<CID>
<Cid>,<Type>,<Parameter>,<Valu
e>,<Length>
<cid>,<certificate name>
<cid>
<Param>,<Value>
<host>,<Port Number>, [<SSL
Flag>,<certificate name>]
<cid>,<Type>,<Timeout>,
<Page>,[Size of content]
<cid>
<0|1|2>
<Frame Control>,<Sequence
Cntrl>,<Channel>,<Rate>,<WmmI
nfo>, <Receiver Mac>,<Bssid of
(WIZnet Co., Ltd.)
Responses / Effects
Attempt TCP client connection to Destination;
CONNECT <CID> if successful.
Ex) AT+NCTCP=192.168.3.200,5000
Open UDP client socket to Destination;
CONNECT <CID> if successful.
Ex) AT+NCUDP=192.168.3.200,5000
Start a TCP server on Port; CONNECT <CID> if
successful.
Ex) AT+NSTCP=5000
UDP server on Port; CONNECT <CID> if
successful.
Ex) AT+NSUDP=5000
Returns the current CID configuration.
Close connection identified by CID.
Ex) AT+NCLOSE=1
Close all open connections.
Configure a socket which is identified by a Cid
Open an SSL connection
Close an SSL connection
Configure an HTTP client
Open an HTTP client connection. This
command opens an HTTP client on the
adaptor and connects to the server specified
by the host name or IP address
GET/POST HTTP data on the HTTP client
connection
Close the HTTP client connection
Enable / Disable Raw Ethernet support.
Unsolicited data transmission
30