ZFSM-101-2 CEL, ZFSM-101-2 Datasheet - Page 17
![no-image](/images/manufacturer_photos/0/1/129/cel_sml.jpg)
ZFSM-101-2
Manufacturer Part Number
ZFSM-101-2
Description
Zigbee / 802.15.4 Modules 2.4GHz 100mW 3.3Volt Freescale MC13202
Manufacturer
CEL
Datasheet
1.ZFSM-101-2.pdf
(18 pages)
Specifications of ZFSM-101-2
Rohs
yes
Frequency Band
2.4 GHz
Line Of Sight Range
4000 ft
Data Rate
250 kbps
Sensitivity
- 91 dBm
Operating Supply Voltage
2.8 V to 3.6 V
Supply Current Transmitting
165 mA
Supply Current Receiving
50 mA
Output Power
20 dBm
Antenna Connector Type
PCB
Maximum Operating Temperature
+ 85 C
Dimensions
36 mm x 25 mm
Interface Type
UART
Minimum Operating Temperature
- 40 C
AGENCy CERTIFICATIONS
CE Certification — Europe
The FreeStar module has been tested and certified for the European Union.
OEM Responsibility to the European Union Compliance Rules
If the FreeStar module is to be incorporated into a product, the OEM must verify compliance of the final product to the Eu-
ropean Harmonized EMC and Low-Voltage/Safety Standards. A Declaration of Conformity must be issued for each of these
standards and kept on file as described in Annex II of the R&TTE Directive.
The manufacturer must maintain the user's guide and adhere to the settings described in the manual for maintaining
European Union Compliance. If any of the specifications are exceeded in the final product, the OEM is required to
make a submission to the notified body for compliance testing.
OEM Labeling Requirements
The `CE' mark must be placed on the OEM product in a visible location.
The CE mark shall consist of the initials “CE” with the following form:
Australia Certification
Number: AS/NZS 4268
· If the CE marking is reduced or enlarged, the proportions given in the above graduated
· The CE mark must be a minimum of 5mm in height
· The CE marking must be affixed visibly, legibly and indelibly. Since the 868 MHz
drawing must be adhered to.
band is not harmonized by a few countries throughout Europe, the Restriction sign must be
placed to the right of the “CE” marking as shown in the picture
(Continued)
FreeStar ZFSM-101-2
Page 17