CP2400-GM Silicon Laboratories Inc, CP2400-GM Datasheet - Page 76

• Manufacturer Part Number: CP2400-GM
• Description: IC LCD DRIVER 48QFN
• Manufacturer: Silicon Laboratories Inc

Specifications of CP2400-GM

• Package / Case: 48-QFN
• Display Type: LCD
• Configuration: 128 Segment
• Interface: SPI Serial
• Current - Supply: 620µA
• Voltage - Supply: 1.8 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Data Ram Size: 256 B
• Interface Type: SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Timers: 2
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Digits Or Characters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1855-5

CP2400/1/2/3
11.2.4. Automatic Gain Control and SmaRTClock Bias Doubling
Automatic Gain Control allows the SmaRTClock oscillator to trim the oscillation amplitude of a crystal in order to
achieve the lowest possible power consumption. Automatic Gain Control automatically detects when the oscillation
amplitude has reached a point where it safe to reduce the drive current, therefore, it may be enabled during crystal
startup. It is recommended to enable Automatic Gain Control in any system which uses the SmaRTClock oscillator
in crystal mode.
Turning off Automatic Gain Control will allow the crystal drive strength after oscillation is started to remain at the
same level used for starting the crystal. This will result in increased power consumption, however the crystal will
have higher immunity against external factors.
Note: Automatic Gain Control may be turned on in self-oscillate mode to reduce the oscillation frequency and the supply cur-
The SmaRTClock Bias Doubling feature allows the self-oscillation frequency to be increased (almost doubled) and
allows a higher crystal drive strength in crystal mode. High crystal drive strength is recommended when using a
crystal with a high ESR and high loading capacitance. Table 11.3 shows a summary of the oscillator operating
modes and allowed operating conditions. SmaRTClock Bias Doubling is enabled by setting BIASX2 (RTC0XCN.5)
to 1.
76
Mode
Crystal
Self-Oscillate
rent.
Table 11.3. SmaRTClock Bias Settings and Allowed Operating Conditions
Bias Double On, AGC On
Bias Double Off, AGC On
Bias Double Off, AGC Off
Bias Double On, AGC Off
Bias Double Off
Bias Double On
Setting
Rev. 1.0
Consumption
Highest
Lowest
Power
High
High
Low
Low
debugging purposes due to its increased
This mode is only recommended for
Allowed Operating Condition
ESR < 50 k, Cload < 10 pF
ESR < 80 k, Cload < 10 pF
ESR < 80 k, Cload < 10 pF
ESR < 80 k, Cload < 8 pF
ESR < 50 k, any load
ESR < 40 k, any load
power consumption.
20 kHz
40 kHz