MAX5956BEEE+ Maxim Integrated Products, MAX5956BEEE+ Datasheet
MAX5956BEEE+
Specifications of MAX5956BEEE+
Related parts for MAX5956BEEE+
MAX5956BEEE+ Summary of contents
Page 1
... Bays (Docking Stations) RAID Variable Speed/BiLevel is a trademark of Maxim Integrated Products, Inc. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. Low-Voltage, Dual Hot-Swap ♦ Safe Hot Swap for +1V to +13.2V Power Supplies with V ♦ ...
Page 2
Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control ABSOLUTE MAXIMUM RATINGS IN_ to GND...........................................................................+14V GATE_ to GND ...........................................-0. ON_, PGOOD_, TIM to GND.......................-0.3V to the higher 0.3V) and (V IN1 SENSE_, MON_, LIM_ to GND ...
Page 3
Low-Voltage, Dual Hot-Swap Controllers with ELECTRICAL CHARACTERISTICS (continued +1V to +13.2V provided at least one supply is higher than +2.7V, V IN_ noted. Typical values are +5V, V IN1 PARAMETER SYMBOL ON_ Input Bias Current ...
Page 4
Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control (Typical Operating Circuits Fairchild FDB7090L, V otherwise noted. Channels 1 and 2 are identical in performance. Where characteristics are interchangeable, channels 1 and 2 are referred to as ...
Page 5
Low-Voltage, Dual Hot-Swap Controllers with (Typical Operating Circuits Fairchild FDB7090L, V otherwise noted. Channels 1 and 2 are identical in performance. Where characteristics are interchangeable, channels 1 and 2 are referred and Y.) ...
Page 6
Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control PIN NAME Channel 1 Status Output (Open Drain, see the Absolute Maximum Ratings). PGOOD1 asserts high when hot 1 PGOOD1 swap is successful and channel 1 is within regulation. PGOOD1 asserts low ...
Page 7
Low-Voltage, Dual Hot-Swap Controllers with Figure 1. Functional Diagram _______________________________________________________________________________________ Independent On/Off Control 7 ...
Page 8
Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control R sets the duration of the startup period from 0.45s TIM to 50ms (see the Setting the Startup Period, RTIM sec- tion). The default startup period is fixed at 9ms when TIM ...
Page 9
Low-Voltage, Dual Hot-Swap Controllers with Slow-Comparator Normal Operation After the startup period is complete, the slow compara- tor is enabled and the device enters normal operation. The comparator threshold voltage (V from 25mV to 100mV. The slow-comparator response time decreases ...
Page 10
Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control Table 1. Status Output Truth Table OVERCURRENT OVERCURRENT PART FAULT (V ) FAULT (V OUT1 Yes MAX5955 X UV/OV X Protection X Yes MAX5956 X UV/OV X Monitor X Applications Information Component ...
Page 11
Low-Voltage, Dual Hot-Swap Controllers with Table 3. Component Manufacturers COMPONENT Dale-Vishay Sense Resistors IRC Fairchild MOSFETs International Rectifier Motorola Setting the Startup Period, R The startup period ( adjustable from 0.45ms to START 50ms. The adjustable startup period ...
Page 12
Low-Voltage, Dual Hot-Swap Controllers with Independent On/Off Control C = 6µF and the load does not draw any current BOARD during the startup period. With no gate capacitor the inrush current, charge, and discharge times are: µ ...
Page 13
Low-Voltage, Dual Hot-Swap Controllers with Layout Considerations To take full advantage of the switch response time to an output fault condition important to keep all traces as short as possible and to maximize the high-current trace dimensions to ...
Page 14
... PART TEMP RANGE MAX5956AEEE -40°C to +85°C MAX5956AEEE+ -40°C to +85°C MAX5956AUEE 0°C to +85°C MAX5956AUEE+ 0°C to +85°C MAX5956BEEE -40°C to +85°C MAX5956BEEE+ -40°C to +85°C MAX5956BUEE 0°C to +85°C MAX5956BUEE+ 0°C to +85°C +Denotes lead-free package. 14 ______________________________________________________________________________________ Q1 IN1 SENSE1 ...
Page 15
... Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 15 © 2005 Maxim Integrated Products ...