MAX15005BAUE+ Maxim Integrated Products, MAX15005BAUE+ Datasheet - Page 9

• Manufacturer Part Number: MAX15005BAUE+
• Description: IC PWR SUPPLY CNTRLR 16-TSSOP
• Manufacturer: Maxim Integrated Products

Specifications of MAX15005BAUE+

• Pwm Type: Current Mode
• Number Of Outputs: 1
• Frequency - Max: 1MHz
• Duty Cycle: 81.5%
• Voltage - Supply: 4.5 V ~ 40 V
• Buck: No
• Boost: Yes
• Flyback: Yes
• Inverting: No
• Doubler: No
• Divider: Yes
• Cuk: No
• Isolated: Yes
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 16-TSSOP
• Frequency-max: 1MHz
• Duty Cycle (max): 80 % (Typ)
• Output Voltage: 1.23 V to 100 V
• Output Current: 1000 mA
• Mounting Style: SMD/SMT
• Switching Frequency: 15 KHz to 500 KHz
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Synchronous Pin: Yes
• Topology: Boost or Flyback or Forward
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIN
10
11
12
13
14
15
16
—
1
2
3
4
5
6
7
8
9
Flyback/Boost/SEPIC Power-Supply Controllers
ON/OFF
SLOPE
NAME
SGND
COMP
PGND
SYNC
REG5
RTCT
OUT
N.C.
V
OVI
CS
SS
FB
EP
IN
CC
_______________________________________________________________________________________
Input Power Supply. Bypass IN with a minimum 0.1μF ceramic capacitor to PGND.
ON/OFF Input. Connect ON/OFF to IN for always-on operation. To externally program the UVLO threshold of the
IN supply, connect a resistive divider between IN, ON/OFF, and SGND. Pull ON/OFF to SGND to disable the
controller.
Overvoltage Comparator Input. Connect a resistive divider between the output of the power supply, OVI, and
SGND to set the output overvoltage threshold.
Programmable Slope Compensation Capacitor Input. Connect a capacitor (C
of slope compensation.
Slope compensation = (2.5 x 10
No Connection. Not internally connected.
Oscillator-Timing Network Input. Connect a resistor from RTCT to REG5 and a capacitor from RTCT to SGND to
set the oscillator frequency (see the Oscillator Frequency/External Synchronization section).
Signal Ground. Connect SGND to SGND plane.
External-Clock Synchronization Input. Connect SYNC to SGND when not using an external clock.
Soft-Start Capacitor Input. Connect a capacitor from SS to SGND to set the soft-start time interval.
Internal Error-Amplifier Inverting Input. The noninverting input is internally connected to SS.
Error-Amplifier Output. Connect the frequency compensation network between FB and COMP.
Current-Sense Input. The current-sense signal is compared to a signal proportional to the error-amplifier output
voltage.
5V Low-Dropout Regulator Output. Bypass REG5 with a 1μF ceramic capacitor to SGND.
Power Ground. Connect PGND to the power ground plane.
Gate Driver Output. Connect OUT to the gate of the external n-channel MOSFET.
7.4V Low-Dropout Regulator Output—Driver Power Source. Bypass V
capacitors to PGND.
Exposed Pad (MAX15004A/MAX15005A only). Connect EP to the SGND plane to improve thermal performance.
Do not use the EP as an electrical connection.
4.5V to 40V Input Automotive
-9
) / C
SLOPE
mV/μs with C
FUNCTION
SLOPE
in farads.
CC
with 0.1μF and 1μF or higher ceramic
SLOPE
) to SGND to set the amount
Pin Description
9