KSZ8995MA Micrel Inc, KSZ8995MA Datasheet - Page 59

• Manufacturer Part Number: KSZ8995MA
• Description: IC SWITCH 10/100 5PORT 128PQFP
• Manufacturer: Micrel Inc

Specifications of KSZ8995MA

• Data Rate: 100Mbps
• Applications: *
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• No. Of Ports: 5
• Ethernet Type: IEEE 802.3u
• Supply Voltage Range: 1.7V To 1.9V, 3.15V To 3.45V
• Operating Temperature Range: 0°C To +70°C
• Digital Ic Case Style: QFP
• No. Of Pins: 128
• Number Of Primary Switch Ports: 5
• Internal Memory Buffer Size: 64
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII/SNI
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Temperature Classification: Commercial
• Interface Type: MII, SNI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1607 - BOARD EVAL EXPERIMENT KSZ8995MA
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-1039

(2) MIB counter read (read port 2 rx 64 counter)
(3) MIB counter read (read port 1 tx drop packets)
Note:
To read out all the counters, the best performance over the SPI bus is (160+3) × 8 × 200 = 260ms, where there are 160 registers, 3 overhead, 8 clocks per
access, at 5MHz. In the heaviest condition, the byte counter will overflow in 2 minutes. It is recommended that the software read all the counters at least
every 30 seconds. The per port MIB counters are designed as “read clear.” A per port MIB counter will be cleared after it is accessed. All port dropped
packet MIB counters are not cleared after they are accessed. The application needs to keep track of overflow and valid conditions on these counters.
May 2005
KS8995MA
Write to Register 110 with 0x1c
(read MIB counter selected)
Write to Register 111 with 0x2e
(trigger the read operation )
Then
Read Register 117 (counter value 31-24)
// If bit 31 = 1, there was a counter overflow
// If bit 30 = 0, restart (reread) from this register
Read Register 118 (counter value 23-16)
Read Register 119 (counter value 15-8)
Read Register 120 (counter value 7-0)
Write to Register 110 with 0x1d
Write to Register 111 with 0x00
Then
Read Register 119 (counter value 15-8)
Read Register 120 (counter value 7-0)
59
M9999-051305
Micrel, Inc.