CNY17-3-000E Avago Technologies US Inc., CNY17-3-000E Datasheet - Page 4

• Manufacturer Part Number: CNY17-3-000E
• Description: OPTOCOUPLER W/BASE 6-DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of CNY17-3-000E

• Output Type: Transistor with Base
• Input Type: DC
• Package / Case: 6-DIP (0.300", 7.62mm)
• Number Of Channels: 1
• Voltage - Isolation: 5000Vrms
• Current Transfer Ratio (min): 100% @ 10mA
• Current Transfer Ratio (max): 200% @ 10mA
• Voltage - Output: 70V
• Current - Output / Channel: 150mA
• Current - Dc Forward (if): 60mA
• Vce Saturation (max): 300mV
• Mounting Type: Through Hole
• Forward Current: 0.3 mA
• Maximum Fall Time: 10 us
• Maximum Input Diode Current: 60 mA
• Maximum Reverse Diode Voltage: 6 V
• Maximum Rise Time: 10 us
• Output Device: Transistor With Base
• Configuration: 1
• Maximum Collector Emitter Voltage: 70 V
• Maximum Collector Emitter Saturation Voltage: 300 mV
• Isolation Voltage: 5000 Vrms
• Current Transfer Ratio: 200 %
• Maximum Forward Diode Voltage: 1.7 V
• Maximum Collector Current: 150 mA
• Maximum Power Dissipation: 250 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 55 C
• No. Of Channels: 1
• Optocoupler Output Type: Phototransistor
• Input Current: 60mA
• Output Voltage: 70V
• Opto Case Style: DIP
• No. Of Pins: 6
• Breakdown Voltage: 70V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1576-5

CNY17-X-300E
LEAD FREE
Solder Reflow Temperature Profile
1) One-time soldering reflow is recommended within
2) When using another soldering method such as in-
Absolute Maximum Ratings
4
Storage Temperature, T
Operating Temperature, T
Lead Solder Temperature, max.
(1.6 mm below seating plane)
Average Forward Current, I
Reverse Input Voltage, V
Input Power Dissipation, P
Collector Current, I
Collector-Emitter Voltage, V
Emitter-Collector Voltage, V
Collector-Base Voltage, V
Collector Power Dissipation
Total Power Dissipation
Isolation Voltage, V
(AC for 1 minute, R.H. = 40 ~ 60%)
the condition of temperature and time profile shown
at right.
frared ray lamp, the temperature may rise partially
in the mold of the device. Keep the temperature on
the package of the device within the condition of (1)
above.
ANODE
CODE
DATE
DIMENSIONS IN MILLIMETERS AND (INCHES)
A CNY17 -
C
iso
S
R
CBO
A
Y Y WW
I
F
CEO
ECO
6.5 ± 0.5
(0.256)
MODEL
NO.
1.2 ± 0.1
(0.047)
7.3 ± 0.5
(0.287)
2.54 ± 0.25
–55˚C to +150˚C
–55˚C to +100˚C
260˚C for 10 s
60 mA
6 V
100 mW
150 mA
70 V
6 V
70 V
150 mW
250 mW
5000 Vrms
Note: Non-halide flux should be used.
25°C
(0.1)
150°C
3.5 ± 0.5
(0.138)
0.35 ± 0.25
60 ~ 150 sec
(0.014)
200°C
217°C
Time (sec)
250°C
90 sec
60 sec
1.0 ± 0.25
(0.039)
10.16 ± 0.3
7.62 ± 0.3
260°C (Peak Temperature)
30 seconds
(0.4)
(0.3)
60 sec
0.35 +0.15/-0.10
(0.014)