MDLS-40263-C-HT-HV-FSTN-LED3G Varitronix, MDLS-40263-C-HT-HV-FSTN-LED3G Datasheet - Page 25

• Manufacturer Part Number: MDLS-40263-C-HT-HV-FSTN-LED3G
• Description: LCD MOD 40X2 CHAR FSTN GN BKLT
• Manufacturer: Varitronix
• Series: MDL(S)-40263r

Specifications of MDLS-40263-C-HT-HV-FSTN-LED3G

• Display Type: TN - Twisted Nematic
• Display Mode: Transflective
• Number Of Digits/alpha: 16
• Outline L X W X H: 108.00mm x 20.00mm x 12.00mm
• Viewing Area: 89.00mm L x 10.00mm W
• Backlight: LED - Green
• Display Format: 40 x 2
• Character Size: 3.15mm H x 1.85mm W
• Character Format: 5 x 8 Dots
• Voltage - Supply: 5.0V
• Dot Size: 0.33mm W x 0.35mm H
• Interface: Parallel
• Operating Temperature: -20°C ~ 70°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 153-1129

“Varitronix Limited reserves the right to change this specification.”
FAX:[phone].
URL:http://www.varitronix.com
Defect Category
COMMON
open
SEGMENT
open
Pattern
deformation
COM-COM
short
SEG-SEG short SEG and SEG connected N/A
COM-SEG
short
Darker/Lighter
High current
Part or all pattern do not
light up
One or few pattern
segment does not light up
Segment fatter or smaller N/A
Pattern deformation
The gap width between
patterns out of limit
Black line between
segments.
COM and COM
connected
COM and SEG connected N/A
Pattern darker or lighter
than standard sample at
activated state.
Current exceed designed
value
Defect Description
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Zone
Not accept
Not accept
Segment fatter than 110% or smaller
than 90% of the designed value.
Reject: ︱(a-b)｜/b≧10%
Missing pattern or extra pattern
>0.1mm, or>20% designed pattern
width is unacceptable
Reject: A or B>0.1mm
(A or B)/W>20%
Missing pattern or extra pattern
>0.2mm or >1/8 designed height is
unacceptable.
Reject: C>0.2mm
Reject:
a<0.1mm
a>0.3mm
Accept if invisible at 30cm distance.
For game application, the excess black
line is acceptable if it does not affect
the visibility.
Not accept
Not accept
Not accept
Refer to standard sample
When power on, the pointer of
short-circuit tester swing to MAX and
then back, while the indicator lights
up then goes out
- END
C>1/8H
VL-FS-MDLS40263-01 REV.C
(MDLS40263-HT-HV-F-LED03-YG-12-CON)
PAGE 25 OF 25
JUN/2006
Criterion
Drawing Specification