DMC-16433N-SEW-B Optrex America Inc, DMC-16433N-SEW-B Datasheet - Page 15
![no-image](/images/no-image-200.jpg)
DMC-16433N-SEW-B
Manufacturer Part Number
DMC-16433N-SEW-B
Description
LCD MODULE 16X4 CHARACTER
Manufacturer
Optrex America Inc
Series
DMC-16433r
Specifications of DMC-16433N-SEW-B
Display Type
STN - Super-Twisted Nematic
Display Mode
Transmissive
Number Of Digits/alpha
*
Outline L X W X H
*
Viewing Area
61.80mm L x 25.50mm W
Backlight
EL - White
Display Format
16 x 4
Character Size
4.75mm H x 2.95mm W
Character Format
5 x 8 Dots
Voltage - Supply
5.0V
Dot Size
0.55mm W x 0.55mm H
Interface
*
Operating Temperature
0°C ~ 50°C
Other names
73-1109
OP461NSEWB
OP461NSEWB
10.Handling Precautions
DMC16433N-SEW-B (BA) No.96-0330
Operex Products are designed for use in ordinary electronic devices such as business machines,
telecommunications equipment, measurement devices and etc..
Optrex Products are not designed, intended, or authorized for use in any application in which the
failure of the product could result in a situation where personal injury or death may occur. These
applications include, but are not limited to, life-sustaining equipment, nuclear control devices,
aerospace equipment, devices related to hazardous or flammable materials, etc. (If Buyer intends to
purchase or use the Optrex Products for such unintended or unauthorized applications, Buyer must
secure prior written consent to such use by a responsible officer of Optrex Corporation.) Should Buyer
purchase or use Optrex Products for any such unintended or unauthorized application (without such
consent), Buyer shall indemnify and hold Optrex and its officers, employees, subsidiaries, affiliates
and distributors harmless against all claims, costs, damages and expenses, and reasonable attorney's
fees, arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Optrex was negligent regarding the
design or manufacture of the part.
1) LCD may be broken because it is made of glass.
2) Polarizer is a soft material and can easily be scratched.
3) Please avoid static electricity.
4) If it is necessary to store LCD modules for a long time, please comply with the following
5) The module does not contain excess current limiter.
6) The connection between the bezel and V
7) Liquid crystal may be leaked when display is broken. Never taste it. If your hands or clothes touch
Optrex shall not be responsible for any infringement of industrial property rights of third parties in any
country arising out of the application or use of Optrex Products, except which directly concern the
structure or production of such products.
① Please be sure to ground human body and electric appliances during work.
② It is preferable to use conductive mat on table and wear cotton clothes or conduction processed
③ Please slowly peel off protective film, because static electricity may be charged.
① Store as delivered by Optrex
② If you store as unpacked, put in anti-static bag, seal its opening and store where it is not subjected
③ Store at temperature 0 to +35℃ and at low humidity. Please refer to our specification sheets for
procedures. If storage condition is not satisfactory, display (especially polarizer) may be
deteriorated or soldering I/O terminals may become difficult (some oxide is generated at I/O
terminals plating).
Please design the limiter to cut excess current in your power supply circuit.
(Some module do not maintain connection between them.)
Please consult OPTREX to specify the connection.
it, please immediately wash using soap.
fiber. Synthetic fiber is not recommended.
to direct sunshine nor fluorescent lamp.
storage temperature range and humidity condition.
SS
(GND) is not specified in the module.
OPTREX
OPTREX CORPORATION
Page 15/15