CU24063-Y100 Noritake Company Inc, CU24063-Y100 Datasheet - Page 26
![MODULE VF DISPLAY 24X6 5V CHAR](/photos/7/96/79648/cu24063-y100_sml.jpg)
CU24063-Y100
Manufacturer Part Number
CU24063-Y100
Description
MODULE VF DISPLAY 24X6 5V CHAR
Manufacturer
Noritake Company Inc
Specifications of CU24063-Y100
Outline L X W X H
98.00mm x 47.00mm
Viewing Area
70.38mm L x 22.69mm W
Display Format
24 x 6
Display Type
Character
Format
5 x 8 Dots
Voltage - Supply
5V
Character Size
2.07mm H x 3.34mm W
Interface
Parallel/Serial
Operating Temperature
-40°C ~ 85°C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Number Of Dots
-
Other names
286-1070
13.3.16 Delete RAM user font
13.3.17 Character blink mode OFF
13.3.18 Character blink mode ON
13.3.19 Specify quick write mode
Code:
Code:
Code:
Code:
Function: Delete defined RAM user font character.
Function: Cancel character blink mode.
Function: Specifies character blink mode.
Function: Specifies quick write mode.
Definable area:
Note:
a:
c:
If the RAM user font character is currently being displayed, the display changes to
built-in character (according to the current settings for “Specify international font set” and
“Specify character code type” command).
Quick data write with minimum BUSY time will be provided by this mode because data
acceptance is given priority over refreshing of the screen.
Blinking speed may deviate from set speed.
The figure in 13.3.21 Specify flickerless write mode shows the difference between
Flickerless Mode and Quick Write Mode.
1Bh 3Fh a c
Select character
Character code to delete
The built-in character is displayed after this command is executed.
This command is ignored if character code for RAM user font is not defined.
1Bh 41h
Blinking stops for characters written after this command is executed.
Characters already displayed are not affected.
1Bh 42h
Blinking starts for characters written after this command is executed.
Characters already displayed are not affected.
Blinking speed can be varied by “Blink speed control” command.
1Bh 45h
Within this mode, continuous high speed data write may cause display to flicker.
a = 1 (01h)
32 (20h) ≦ c ≦ 255 (FFh)
- 25 -
CU24063-Y100