CU24063-Y100 Noritake Company Inc, CU24063-Y100 Datasheet - Page 32
![MODULE VF DISPLAY 24X6 5V CHAR](/photos/7/96/79648/cu24063-y100_sml.jpg)
CU24063-Y100
Manufacturer Part Number
CU24063-Y100
Description
MODULE VF DISPLAY 24X6 5V CHAR
Manufacturer
Noritake Company Inc
Specifications of CU24063-Y100
Outline L X W X H
98.00mm x 47.00mm
Viewing Area
70.38mm L x 22.69mm W
Display Format
24 x 6
Display Type
Character
Format
5 x 8 Dots
Voltage - Supply
5V
Character Size
2.07mm H x 3.34mm W
Interface
Parallel/Serial
Operating Temperature
-40°C ~ 85°C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Number Of Dots
-
Other names
286-1070
13.3.38 Screen saver
13.3.39 User set up mode start
13.3.40 User set up mode end
Code:
Code:
Code:
Function: End user set up mode, and software reset of display is executed.
Definable area:
Function: Control power ON or OFF, and start screen saver mode.
Definable area:
Function: Start user set up mode.
Definable area:
p:
p=00h, 01h, 30h, 31h: Control power ON or OFF. This is applied until this command is
re-specified
p=02h, 03h, 32h, 33h: Start screen saver mode. When next command or data is
inputted, screen saver is cancelled, and previous display condition is resumed.
All dots ON is at gray-shade level 8 (100%), regardless of the setting before Screen
saver action.
This command is only valid in Direct Command mode.
Display screen is cleared and normal commands stop being accepted.
This command is only valid in user setup mode.
After this command is executed, software reset is executed, the receiving buffer is
cleared, and all settings and display are reset to a power-on condition.
Jumper settings are re-loaded; baud rate (for asynchronous serial), and test mode
setting.
1Fh 28h 61h 40h p
Screen saver mode
1Fh 28h 65h 01h 49h 4Eh
1Fh 28h 65h 02h 4Fh 55h 54h
0 (00h) ≦ p ≦ 3 (03h), 48 (30h) ≦ p ≦ 51 (33h)
d1 = 49h (Character "I")
d2 = 4Eh (Character "N")
d1 = 4Fh (Character "O")
d2 = 55h (Character "U")
d3 = 54h (Character "T")
p=00h or 30h: Power OFF (display OFF, Power save mode)
p=01h or 31h: Power ON (display ON)
p=02h or 32h: All dots OFF
p=03h or 33h: All dots ON
- 31 -
CU24063-Y100