HFBR-2523Z Avago Technologies US Inc., HFBR-2523Z Datasheet - Page 4

• Manufacturer Part Number: HFBR-2523Z
• Description: RECEIVER FIBER OPTIC 600NM 40KBD
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-2523Z

• Data Rate: 40KBd
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 3.7mA
• Function: Designed for use in high and low volume cost assembly processes such as auto insertion and wave soldering.
• Product: Receiver
• Wavelength: 600 nm
• Diode Capacitance: 86 pF
• Maximum Rise Time: 80 ns
• Maximum Fall Time: 40 ns
• Pulse Width Distortion: 80 ns
• Maximum Output Current: 5 mA
• Operating Supply Voltage: - 0.5 V to 7 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Power - Minimum Receivable: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: Plastic Optical Fiber
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-2064

Versatile Link Printed Board Layout Dimensions
Horizontal Module
Interlocked (Stacked) Assemblies
Horizontal packages may be stacked by placing units
with pins facing upward. Initially engage the inter -
locking mechanism by sliding the L bracket body from
above into the L slot body of the lower package. Use
a straight edge, such as a ruler, to bring all stacked
units into uniform alignment. This tech nique prevents
potential harm that could occur to fingers and hands of
assemblers from the package pins. Stacked horizontal
Stacking Horizontal Modules
Figure 1. Interlocked (stacked) horizontal or vertical packages
4
TOP VIEW
(0.100)
2.54
DIMENSIONS IN MILLIMETERS (INCHES).
4
5
3 2
1
8
(0.300)
7.62
(0.073)
1.85
1.01 (0.040) DIA.
(0.300)
MIN.
7.62
(refer to Figure 1)
PCB EDGE
Vertical Module
packages can be disengaged if necessary. Repeated
stacking and unstack ing causes no damage to individual
units.
To stack vertical packages, hold one unit in each hand,
with the pins facing away and the optical ports on the
bottom. Slide the L bracket unit into the L slot unit. The
straight edge used for horizontal package alignment is
not needed.
Stacking Vertical Modules